Přihlášení
Košík

Centrální upevňovací sada P

Vybraná varianta
Centrální upevňovací sada P 6 (0.0.713.37)
Centrální upevňovací sada P 6
0.0.713.37
Zobrazit všechny
Získat data CAD a soubory ke stažení

Technické údaje

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Rozsah dodávky

1 upínací kolík, ocel, leskle pozinkovaný
1 drážková matice 6, ocel, M5, leskle pozinkovaná
1 objímka s otvorem, ocel, leskle pozinkovaná
1 závrtný šroub M6, ocel, leskle pozinkovaný

Vlastnosti

Číslo zboží0.0.713.37
LineLine 6
Bezpečné z hlediska ESDBezpečné z hlediska ESD = Ano
Hmotnostm = 17 g
Dodací jednotka1 sada

Popis

Central-Fastening Set P 6 is used to connect parallel Line 6 profiles. As a result, separate inherently stable guard and partition elements can be very quickly connected together in series. A height offset can also be subsequently evened out.

Montážní pokyny

In order to use the fastener, one of the profiles needs to have one hole drilled into it for the fastener sleeve and another for the clamping pin.
Installation sequence for Central-Fastening Set P 6:
1. Drill holes into profile 1 and insert the fastener sleeve
2. Swivel the T-Slot Nut into the groove of profile 2 and screw in the clamping pin until the lower edge of the sleeve is flush with the surface of the profile
3. Move the T-Slot Nut and clamping pin to the correct position in the groove and put the profiles together
4. Tighten the connection with the M6 grub screw (tightening torque M = 3.5 Nm)
5. To release the connection, remove the grub screw

Varianty

Řadit podle

Fixation centrale P 8

Fixation centrale P 8

0.0.619.69
Série:  8Type de rainure:  8 mmFiletage:  M8
Fixations centrales P 6

Fixations centrales P 6

0.0.713.37
Série:  6Type de rainure:  6 mmFiletage:  M6

Ke stažení

Data CAD

Klasifikace

Klasifikace jsou oborové datové standardy pro výrobky, které se používají mimo jiné k podpoře strukturovaného zpracování v systémech ERP a e-business. Potřebujete pro svůj systém elektronického zadávání veřejných zakázek údaje o klasifikaci všech výrobků? Pokud ano, neváhejte nás kontaktovat.
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
UNSPSC 9.0
31162503
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.0
22041424
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Číslo celního tarifu
83024200