Login
Cart

Bearing Carriage PS

Selected variant
Bearing Carriage PS 4-15 (0.0.443.06)
Bearing Carriage PS 4-15
0.0.443.06
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 Housing, St, hardened
2 wipers, PA, black
2 lubricating nipples
Notes on Use and Installation

Properties

Article number0.0.443.06
Lineline 8
ESD-safeNo
Velocityvmax. = 5 m/s
Weightm = 140 g
Delivery unit1 pce.
Load Factor, dynamicC = 7.200 N
Load Factor, staticC0 = 14.500 N

Description

*Note: Due to the fixing of the guide rail, the stated tensile forces of the linear guide system cannot be fully utilised in all directions.
The Bearing Carriages can be used either individually or in various combinations on one or more rails.
The Bearing Carriage has four polished tracks on which the bearings are in linear rolling-ball contact with the profiled rail. The bearings are recirculated through the end-face reverse units and closed return conduits. The carriages are fitted with end-face wipers and additional longitudinal wipers in order to minimise sensitivity to external influences.
Profiles 8 can be secured to the Bearing Carriage by means of Button-Head Screws ISO 7380 and Locating Washers 8 (Section 3.2 Screws and Universal- Elements).
Guide rail PS 4-15 is attached to the Profile 8 groove. The rail has been shaped for this purpose and centres automatically when screwed against Groove Profile 8 Al M4-60.
The permissible load for a linear guide system depends on the load bearing capacity of the guide elements but also on the strength of the screw connections and the construction of the profile frame.
The minimum stroke length (hmin.) is required if the rolling-ball contact is to be adequately lubricated. The carriage is charged at the factory with lithium-based grease. Lithium-based grease with a mineral-oil base can be used for re-lubrication.
Given the contact pressure of the wipers, a displacement force of 10 N must be taken into account irrespective of the load.
The permissible load for a linear guide system depends on the load bearing capacity of the guide elements but also on the strength of the screw connections and the construction of the profile frame.
The minimum stroke length (hmin.) is required if the rolling-ball contact is to be adequately lubricated. The carriage is charged at the factory with lithium-based grease. Lithium-based grease with a mineral-oil base can be used for re-lubrication.
Given the contact pressure of the wipers, a displacement force of 10 N must be taken into account irrespective of the load.

Variants

Sort by

Kugelumlaufführung-Wagen PS 4-15

Kugelumlaufführung-Wagen PS 4-15

0.0.443.06
Anzahl Umlaufreihen:  4Schienenbreite:  15 mm
Kugelumlaufführung-Wagen PS 4-25

Kugelumlaufführung-Wagen PS 4-25

0.0.443.16
Anzahl Umlaufreihen:  4Schienenbreite:  25 mm
Kugelumlaufführung-Wagen PS 4-20

Kugelumlaufführung-Wagen PS 4-20

0.0.666.39
Anzahl Umlaufreihen:  4Schienenbreite:  20 mm
Kugelumlaufführung-Wagen PS 2-15

Kugelumlaufführung-Wagen PS 2-15

0.0.694.38
Anzahl Umlaufreihen:  2Schienenbreite:  15 mm

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23050701
eCl@ss 11.0
23050701
eCl@ss 4.0
23050701
eCl@ss 4.1
23050701
eCl@ss 5.0
23050701
eCl@ss 5.1
23050701
eCl@ss 6.0.1
23050701
eCl@ss 7.1
23050701
UNSPSC 9.0
31171506
UNSPSC 7.0
31171506
Customs tariff number
84829900