Login
Cart

Mitre-Fastening Set

Selected variant
Mitre-Fastening Set 6 (0.0.627.12)
Mitre-Fastening Set 6
0.0.627.12
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Clamping pin M5x23, St, bright zinc-plated
Sleeve with bore, St, bright zinc-plated
Grub screw M6, St, bright zinc-plated
T-Slot Nut 6 St M5, bright zinc-plated

Properties

Article number0.0.627.12
Lineline 6
ESD-safeYes
Weightm = 17 g
Delivery unit1 set

Description

Distances a and b can also be calculated as a function of angle γ:
Fasten together mitre-cut profiles with ease. Ideal for protective hoods, partitions and enclosures.
1. Mitre-cut profile at angle γ.
2. Drill a counterbore (⌀ 9.1 mm, depth 21 mm – Drill 0.0.628.25) for the fastener sleeve into the side of the mitre-cut profile (use of drilling jig 0.0.616.77 recommended).
3. Drill a hole (⌀ 5.5 mm – Drill 0.0.628.55) into the mitred face of the profile (use of drilling jig 0.0.616.89 recommended). Minimum hole depth: 15 mm.
4. Insert the T-Slot Nut into the profile groove of the continuous profile and screw in the clamping pin until the mark around the perimeter is level with the profile surface.
5. Insert the fastener sleeve into the counterbore of the mitred profile and fit the assembly over the clamping pin.
6. Drive grub screw M6 into the fastener sleeve and clamp the profile connection (M = 3.5 Nm).
Your item dealer can provide the required mitre cuts and profile processing as a service.

Variants

Sort by

Mitre-Fastening Set 8

Mitre-Fastening Set 8

0.0.492.30
Line:  8Connection type:  Variable
Mitre-Fastening Set 6

Mitre-Fastening Set 6

0.0.627.12
Line:  6Connection type:  Variable
Mitre-Butt-Fastening Set 8

Mitre-Butt-Fastening Set 8

0.0.492.25
Line:  8Connection type:  Variable, butting
Mitre-Butt-Fastening Set 6

Mitre-Butt-Fastening Set 6

0.0.606.47
Line:  6Connection type:  Variable, butting

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
UNSPSC 9.0
31162503
eCl@ss 11.0
23360290
eCl@ss 4.0
22041424
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
83024200