Login
Cart

Pivot Bearing Set D30-28.5 M8

0.0.683.99

Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 Bearing Unit D30-28.5 M8, floating bearing, Al, St, bright zinc-plated
1 Bearing Unit D30-28.5 M8, fixed bearing, Al, St, bright zinc-plated

Properties

Article number0.0.683.99
LineLine D30
ESD-safeYes
Weightm = 159 g
Delivery unit1 set
Status on deliveryPreassembled

Description

Responds to the smallest changes! Compact and robust Pivot Bearing Set D30-28.5 M8 ensures that even light transported goods can actuate and trigger mechanisms.
The pivot bearing is fastened to the end face of a (profile) tube using a Threaded Insert and is also connected to a Fastener D30. This ensures the profile can be rotated around its longitudinal axis.
The Pivot Bearing Set comprises a fixed and a floating bearing with 2 mm of length compensation. This ensures axial loads can be accommodated and compensates for any expansion in the shaft caused by heat – all without compromising precision. The ball-bearing mounted pivot bearing is easy running and exhibits low friction.
If only one bearing position is required or if very high loads occur, it is advisable to use Double Pivot Bearing Unit D30-28.5 M8. This features two ball bearings. Consequently, it can accommodate higher forces for rotating motions. As a fixed bearing, Double Pivot Bearing Unit D30 doesn’t offer any play under axial load.
Note: To build structures that allow both rotation and movement along an axis, use item Plain Bearings D40/D30.
Use the relevant M8 Threaded Insert to create a fixing with the end-face of a D30 profile.
Profile length L1 varies depending on the profile and Threaded Insert used. Both bearing units of Pivot Bearing Set D30-28.5 M8 are fastened at the ends of the profile. Loading values F correspond to those of Profile Tube D30.

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23050890
eCl@ss 4.0
23050301
eCl@ss 5.0
23050801
UNSPSC 9.0
31171502
eCl@ss 6.0.1
23050890
eCl@ss 4.1
23050301
eCl@ss 5.1
23050801
UNSPSC 7.0
31171502
eCl@ss 7.1
23050890
eCl@ss 11.0
23050890
Customs tariff number
84832000