Clamp Profile 6 30x30


Selected variant
Clamp Profile 6 30x30-180°, natural (0.0.431.14)
Clamp Profile 6 30x30-180°, natural
0.0.431.14
Show all
* Mandatory information

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Cap Screws DIN 912-M4x12, St, bright zinc-plated

Properties

Article number0.0.431.14
Lineline 6
ESD-safeNo
Cross-sectional areaA = 4,64 cm2
Moment of Inertia, torsionalIt = 0,47 cm4
Moment of Inertia, x-axisIx = 3,53 cm4
Moment of Inertia, y-axisIy = 3,88 cm4
Weightm = 1,55 kg/m
Delivery unitcut-off max. 6000 mm
MaterialAl, anodized
Colournatural
Resistance Moment, x-axisWx = 2,35 cm3
Resistance Moment, y-axisWy = 2,54 cm3

Description

Where the panels are to be divided by a central strut (Clamp Profile 180°), this should always be tapped at the ends and bolted between the outer frame profiles.
The Profile Edging (i.e. clamping strip) will need to be interrupted accordingly.
When designing a frame, it is important to ensure that horizontal Clamp Profiles are always connected via their end faces. An appropriate bore should be drilled through the vertical profiles.
When designing a frame, it is important to ensure that horizontal Clamp Profiles are always connected via their end faces. An appropriate bore should be drilled through the vertical profiles.

Variants

Sort by

Delivery unit:  Cut-offLength:  20 ... 6000Design:  StandardNumber of panels:  1
Delivery unit:  PieceLength:  6000 Design:  StandardNumber of panels:  1
Delivery unit:  Cut-offLength:  20 ... 6000Design:  EconomyNumber of panels:  1
Delivery unit:  PieceLength:  6000 Design:  EconomyNumber of panels:  1
Delivery unit:  Cut-offLength:  20 ... 6000Design:  StandardNumber of panels:  2
Delivery unit:  PieceLength:  6000 Design:  StandardNumber of panels:  2

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 6.0.1
23360101
eCl@ss 7.1
23360101
eCl@ss 8.0
23360101
UNSPSC 7.0
30152001
UNSPSC 9.0
30152001
eCl@ss 11.0
23360101
eCl@ss 4.0
35020106
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
Customs tariff number
76042100