Profile X 8 40x40


Selected variant
Profile X 8 40x40 1NO light, natural (0.0.611.86)
Profile X 8 40x40 1NO light, natural
0.0.611.86
Show all

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Technical note

Profile features easy-to-open groove(s)

Properties

Article number0.0.611.86
Lineline X
Lineline 8
ESD-safeYes
Cross-sectional areaA = 6,68 cm2
Moment of Inertia, torsionalIt = 2,71 cm4
Moment of Inertia, x-axisIx = 9,74 cm4
Moment of Inertia, y-axisIy = 9,47 cm4
Weightm = 1,8 kg/m
Delivery unit1 pce., length 6000 mm
MaterialAl, anodized
Permissible groove extraction forceF = 2500 N
Colournatural
Resistance Moment, x-axisWx = 4,82 cm3
Resistance Moment, y-axisWy = 4,73 cm3

Description

Line 8 profiles from item are available with closed grooves in a variety of arrangements. The profile wall can be opened up partially or completely so that the groove underneath can be used. The NO design variant indicates that the closed grooves are particularly easy to open up thanks to two notches on the underside of the outer surface.
Automatic-Fastening Set 8 NO (0.0.489.96) is ideal for connecting profiles together. It requires only a minimal opening in the groove and comes with its own cap.

Assembly Instructions

T-Slot Opener 8NO is used to remove the groove cover over any length beginning from the end face of the profile or any other opening of sufficient size. If the opening does not extend to the end of the profile, the end of the opening must be defined with a hole of ⌀ 9.2 mm.

Variants

Sort by

Delivery unit:  Cut-offLength:  20 ... 6000Grooves:  Open OpenFunction integration:  None
Delivery unit:  PieceLength:  6000 Grooves:  Open OpenFunction integration:  None
Delivery unit:  Cut-offLength:  20 ... 6000Grooves:  1 side closed 1 side closedFunction integration:  Simple groove opening (NO)
Delivery unit:  PieceLength:  6000 Grooves:  1 side closed 1 side closedFunction integration:  Simple groove opening (NO)
Delivery unit:  Cut-offLength:  20 ... 6000Grooves:  2 sides closed (90°) 2 sides closed (90°)Function integration:  Simple groove opening (NO)
Delivery unit:  PieceLength:  6000 Grooves:  2 sides closed (90°) 2 sides closed (90°)Function integration:  Simple groove opening (NO)
Delivery unit:  Cut-offLength:  20 ... 6000Grooves:  2 sides closed (180°) 2 sides closed (180°)Function integration:  Simple groove opening (NO)
Delivery unit:  PieceLength:  6000 Grooves:  2 sides closed (180°) 2 sides closed (180°)Function integration:  Simple groove opening (NO)
Delivery unit:  Cut-offLength:  20 ... 6000Grooves:  3 sides closed 3 sides closedFunction integration:  Simple groove opening (NO)
Delivery unit:  PieceLength:  6000 Grooves:  3 sides closed 3 sides closedFunction integration:  Simple groove opening (NO)
Delivery unit:  Cut-offLength:  20 ... 6000Grooves:  All closed All closedFunction integration:  Simple groove opening (NO)
Delivery unit:  PieceLength:  6000 Grooves:  All closed All closedFunction integration:  Simple groove opening (NO)

Load Calculation

Deflection calculator

Force application
Orientation

Length is required

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
35020190
eCl@ss 11.0
23360101
UNSPSC 9.0
30102306
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
eCl@ss 6.0.1
23360101
eCl@ss 4.0
35020106
eCl@ss 7.1
35020190
UNSPSC 7.0
30102306
Customs tariff number
76042100