userMenu.login
cart.title

Bearing Unit

objectDetails.currentVariantLabel
Bearing Unit 5 D6 e (0.0.390.16)
Bearing Unit 5 D6 e
0.0.390.16
objectDetails.showAllVariants
cad.iconLink.title

technicalData.sectionHeadline

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

technicalData.scopeOfDeliveryHeadline

Bolt 5 D6 e
Roller D6
2 Button-Head Screws ISO 7380-M5x8, St, bright zinc-pl.
2 washers ISO 7089 - 5 - 200 HV, bright zinc-plated
Notes on Use and Installation

technicalData.propertiesHeadline

technicalData.articleNumber0.0.390.16
Lineline 5
ESD-safeNo
Weightm = 47 g
Delivery unit1 pce.
MaterialAl, anodized, natural
Torque, locknutMlocknut = 3 Nm
Load Factor, dynamicC = 1’620 N
Load Factor, staticC0 = 780 N

description.sectionHeadline

Bearing Units are used in conjunction with a carriage plate for constructing the sliding carriages.
Bearing Units e (eccentric) and c (centric) differ in the geometry of the bolts.
The eccentric bolts can be adjusted subsequently so as to ensure that the guide unit is free from play. Bearing Units should therefore always be used in pairs in both centric and eccentric versions.
The Bearing Units must always be equipped with End Cap and Lubricating Systems in order to prevent premature wear.
The Bearing Units are provided with bores which can be used as fastening and fixing bores when making connections.
a = dowel DIN  6325-3x12
If the Bearing Units are to be mounted offset 90°, the fastening and fixing bores must be located in accordance with the specified dimensions or in the dark-grey areas.

variants.sectionHeadline

variants.mobile.label

Bearing Unit 5 D6 e

Bearing Unit 5 D6 e

0.0.390.16
Line:  5Guide type:  Shaft D6Bolt shape:  Eccentric
Bearing Unit 5 D6 c

Bearing Unit 5 D6 c

0.0.390.15
Line:  5Guide type:  Shaft D6Bolt shape:  Centric
Bearing Unit 8 D6 e

Bearing Unit 8 D6 e

0.0.356.31
Line:  8Guide type:  Shaft D6Bolt shape:  Eccentric
Bearing Unit 8 D6 c

Bearing Unit 8 D6 c

0.0.356.30
Line:  8Guide type:  Shaft D6Bolt shape:  Centric
Bearing Unit 8 D10 e

Bearing Unit 8 D10 e

0.0.442.09
Line:  8Guide type:  Shaft D10Bolt shape:  Eccentric
Bearing Unit 8 D10 c

Bearing Unit 8 D10 c

0.0.442.10
Line:  8Guide type:  Shaft D10Bolt shape:  Centric
Bearing Unit 8 D14 e

Bearing Unit 8 D14 e

0.0.294.15
Line:  8Guide type:  Shaft D14Bolt shape:  Eccentric
Bearing Unit 8 D14 c

Bearing Unit 8 D14 c

0.0.294.14
Line:  8Guide type:  Shaft D14Bolt shape:  Centric
Bearing Unit 8 D25 e

Bearing Unit 8 D25 e

0.0.350.11
Line:  8Guide type:  Shaft D25Bolt shape:  Eccentric
Bearing Unit 8 D25 c

Bearing Unit 8 D25 c

0.0.350.12
Line:  8Guide type:  Shaft D25Bolt shape:  Centric

downloads.sectionHeadline

title

classifications.sectionHeadline

classifications.introduction
eCl@ss 8.0
23050702
eCl@ss 11.0
23050702
eCl@ss 4.1
23050702
eCl@ss 5.1
23050702
eCl@ss 4.0
23050702
eCl@ss 5.0
23050702
eCl@ss 6.0.1
23050702
UNSPSC 9.0
31171506
eCl@ss 7.1
23050702
UNSPSC 7.0
31171506
classifications.customTariffsNumber
84832000