item

Double Profile Tube

Selected variant
Double Profile Tube D30-60, natural (0.0.681.55)
Double Profile Tube D30-60, natural
0.0.681.55
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number0.0.681.55
LineLine D30
ESD-safeYes
Cross-sectional areaA = 4,54 cm2
Moment of Inertia, torsionalIt = 4,95 cm4
Moment of Inertia, x-axisIx = 39,37 cm4
Moment of Inertia, y-axisIy = 3,43 cm4
Weightm = 1,227 kg/m
Delivery unit1 pce., length 6000 mm
MaterialAl, anodized
Colournatural
Resistance Moment, x-axisWx = 8,75 cm3
Resistance Moment, y-axisWy = 2,29 cm3

Description

It takes two! Double Profile Tube D30-60 consists of two Profile Tubes D30 that are connected by an unbroken aluminium web. The web considerably increases rigidity compared to two Profile Tubes D30 that are not connected.
Double Profile Tube D30-60 is perfect for use as a long horizontal beam in racks. It can also be installed as a vertical strut or load-bearing rib under a worksurface.
Note: Fastener D30 T1 (0.0.687.84), which has a narrow gap at the side, is used to connect the profile tube via its end face. Fastener D30, internal (0.0.669.52) can be used to create a smooth 90° connection that has a lower load-carrying capacity.
Permissible loads for constructions built with Double Profile Tube D30-60.
The diagram shows the permitted load in relation to support span a. It is based on the maximum permissible deflection set by item, which is 1/100 of the support span. When designing rack structures, please observe the limit values set out in the relevant statutory regulations (e.g. DGUV regulation 108-007 in Germany).

Variants

Sort by

One variant matches "Piece"
Tubolare profilato doppio D30-60, naturale

Tubolare profilato doppio D30-60, naturale

0.0.681.55
Unità di consegna:  PezzoLunghezza:  6000
One more variant in this product family
Tubolare profilato doppio D30-60, naturale

Tubolare profilato doppio D30-60, naturale

0.0.682.60
Unità di consegna:  TaglioLunghezza:  20 ... 6000

Load Calculation

Deflection calculator

Force application
Orientation

Length is required

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360101
eCl@ss 11.0
23360101
eCl@ss 7.1
23360101
UNSPSC 9.0
30102306
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
eCl@ss 6.0.1
23360101
eCl@ss 4.0
35020106
UNSPSC 7.0
30102306
Customs tariff number
76042100