Insertion Guide / End Stop - Suspended Conveyor System

Insertion Guide / End Stop - Suspended Conveyor System

Show all 2 variants
On request

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 End Stop 6 30x30-80, PA-ESD, black similar to RAL 9005
1 Washer ISO 7089-5-200 HV, St, bright zinc-plated
1 Washer ISO 7092-6-200 HV, St, bright zinc-plated
1 Hexagon Socket Head Cap Screw DIN 912-M5x30, St, bright zinc-plated
1 Hexagon Socket Head Cap Screw DIN 7500-M6x20, head shape to DIN 7984, St, bright zinc-plated
1 Automatic Fastener 6 sleeve with thread
1 spacer sleeve D8/D6.4-5, St, stainless
1 spacer sleeve D7/D5.4-10, St, stainless


Article number 0.0.716.12
Line Line D30
ESD-safe Yes
Weight m = 78,5 g
Delivery unit 1 set
Max. load-carrying capacity F = 100 N
Colour black similar to RAL 9005


Limit Stop 6 30x30-80 ESD can also be used on the intake end of the conveyor as an alternative to Insertion Guide 6 30x30-80 ESD (0.0.716.11). When used in this way, it provides a back stop, which is useful for mobile frames and tugger trains.
As the Conveyor Rail Profile of the item Suspended Conveyor System needs only a slight incline, minor centrifugal forces can be enough to cause Carriages to slip from the rail when a trolley is full.
End Stop 6 30x30-80 ESD acts as a stopper for Carriages at the removal end in material supply solutions.
The ESD-safe End Stop is fastened to the end face of the Conveyor Rail Profile using the enclosed self-tapping screw and Automatic Fastener.

Assembly Instructions

Installation sequence for Limit Stop 6 30x30-80 ESD:
1. Screw the sleeve of the Automatic Fastener into the Line 6 groove on the underside of the Conveyor Rail Profile.
2. Use the self-tapping Hexagon Socket Head Cap Screw to fasten the Limit Stop to the core bore (ensure the correct washer is used).
3. Screw the Hexagon Socket Head Cap Screw, along with washer, into the sleeve of the Automatic Fastener.
Fastening Bracket 6 30 D30 T1 is fastened to a (Profile) Tube D30 and the groove that runs along the top of Conveyor Rail Profile 6 30x30-80.
Fastening Bracket 6 30 D30 (0.0.715.27), which is flatter, serves as the primary suspension point for the Conveyor Rail Profile and is fitted at the start and end points of the conveyor line.



Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
eCl@ss 7.1
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0.1
eCl@ss 11.0
Customs tariff number