Login
Cart

Sliding-Door Catch

Selected variant
Sliding Door 8 40x40, Catch (0.0.717.36)
Sliding Door 8 40x40, Catch
0.0.717.36
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

2 catch plates, St, bright zinc-plated
2 locating lugs, die-cast zinc
4 buffers, EPDM
2 T-Slot Nuts 8 St M8, bright zinc-plated
2 dome-head screws M8x14, St, bright zinc-plated

Properties

Article number0.0.717.36
TorqueM = 8 Nm
Lineline 8
ESD-safeNo
Weightm = 136 g
Delivery unit1 set

Description

A sliding door made using Profiles 8 40x40 can consist of a single moving door and a fixed segment. In this case, the maximum access area is 50 percent of the overall width.
The door can be used with lockable Sliding-Door Lock 8 40x40 (0.0.723.87), which also acts as a handle. Alternatively, you can also use an item handle and Sliding Door Magnetic Catch 8 (0.0.718.40).
To build a sliding door made of Profiles 8 40x40 that has a large access area, it is best to use three moving door segments. In this case, the maximum opening is 66 percent of the overall width.
A sliding door that doesn’t have a fixed segment can be opened and closed from the right or left. A Sliding-Door Lock 8 (0.0.715.40) is therefore used on the front door segment and a Sliding-Door Lock 8 40x40 (0.0.723.87) combined with Frame Profile 8 40x40 (0.0.707.73) on the rear sliding door.
Alternatively, item handles and Sliding Door Magnetic Catches 8 (0.0.718.40) can also be used.
When a sliding door made using Profiles 8 40x40 has two moving and two fixed segments, it can be opened in the centre. The maximum access area equates to 50 percent of the overall width.
Both moving segments can be held shut by Sliding-Door Lock 8 (0.0.715.40). Alternatively, you can also use item handles and Sliding Door Magnetic Catches 8 (0.0.718.40).
Sliding Door 8 40x40, Catch makes it possible to open and close several door segments made from Profiles 8 40x40 simultaneously. When moving the door segment at the front, the sliding door segment behind automatically moves with it. Integrated buffers ensure door segments catch on each other gently in both directions of movement.
Two catches are used on each door segment (one at the top, one at the bottom).

Assembly Instructions

Variants

Sort by

Porte coulissante 8 32x18, pièce d’entraînement

Porte coulissante 8 32x18, pièce d’entraînement

0.0.717.55
Modèle:  Profilé d’encadrement 8 32x18
Porte coulissante 8 40x40, pièce d'entraînement

Porte coulissante 8 40x40, pièce d'entraînement

0.0.717.36
Modèle:  Profilé 8 40x40

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23240190
eCl@ss 4.0
22041415
eCl@ss 4.1
22041415
UNSPSC 9.0
31162703
eCl@ss 5.0
23210192
eCl@ss 5.1
23210192
eCl@ss 6.0.1
23210192
UNSPSC 7.0
31162703
eCl@ss 11.0
23240190
eCl@ss 7.1
23240190
Customs tariff number
73269098