Login
Cart

Clamp Profile 8 40x40

Selected variant
Clamp Profile 8 40x40 E, natural (0.0.436.92)
Clamp Profile 8 40x40 E, natural
0.0.436.92
Show all
* Mandatory information
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

a = 2 - 8.5 mm
t = 23 mm

Properties

Article number0.0.436.92
Lineline 8
ESD-safeNo
Cross-sectional areaA = 6.5 cm2
Moment of Inertia, torsionalIt = 1.07 cm4
Moment of Inertia, x-axisIx = 8.79 cm4
Moment of Inertia, y-axisIy = 10.67 cm4
Weightm = 1.76 kg/m
Delivery unitcut-off max. 6000 mm
MaterialAl, anodized
Colournatural
Resistance Moment, x-axisWx = 4.29 cm3
Resistance Moment, y-axisWy = 5.25 cm3

Description

Clamp-Profile System E is ideal for easy and fast construction of frame elements for enclosure and guard systems. A stainless steel strip is inserted into the weight- optimised profiles to protect the various panel elements from becoming dislodged from the groove.
Securing and clamping the panels increases the overall strength of the frame elements.
Profiles are connected using Clamp-Profile Fasteners.
The frame elements of Clamp Profiles E are hung using Clamp-Profile Hangers E, which engage in the Clamp-Profile Fastener.
The clamping groove in the profiles of Protective Enclosure System E corresponds to the groove of Clamp Profiles 8 40x40 E (see Comprehensive Catalogue Section 3.3.3 Fastening Panels in Special Grooves).
The new Clamp Profiles can therefore be combined at will with Clamp Profiles 8 40x40 E.
Clamp Profiles for Protective Enclosure System E are a particularly cost-effective solution for constructing stable frames for panel elements. Panels slid into the deep clamping grooves in the profiles are held securely.
Clamp Profiles 8 80x40-180° light and W80x80x40 light combine the function of the Stand Profile and Clamp Profile. They are supplied in optimum cut-off special lengths of (4800 mm) for Stand Profiles.
Solid panels of thickness 4 to 6 mm (e.g. Polycarbonate 4 mm) are recommended for the panel elements. The panels are secured by means of Lip Seals 8 which ensure that they fit securely in the groove.
Clamp Profiles E:
An inserted spring steel strip presses along the length of the clamped panel element.
With panels made from materials with little surface hardness (for example Polycarbonate, Corrugated Mesh Al) this results in a particularly high inherent strength.

Assembly Instructions

Installation sequence:
1. Insert the Clamp-Profile Strip into the spring cavity in the Clamp Profile.
2. Press in the panel element.
a = 2 - 8.5 mm
t = 23 mm
Producing frames:
1. Cut-off of panel element = inside frame dimension + 2 x insertion depth (t).2. Fit the Clamp-Profile Fastener loosely onto the upright frame profiles.
3. Place the horizontal frame profiles centrally onto the panel element so as to ensure initial gentle clamping by the steel strip. The panel element must not yet be pressed all the way into the groove.
4. Assemble the frame and tighten the bolts. The panel element will be pressed into the groove by varying amounts (depending on the tolerance position) when the bolts are tightened.

Variants

Sort by

Clamp Profile 8 40x40, natural

Clamp Profile 8 40x40, natural

0.0.196.50
Delivery unit:  Cut-offLength:  20 ... 6000Design:  StandardNumber of panels:  1Panel thickness range:  2-8.5 mm
Clamp Profile 8 40x40, natural

Clamp Profile 8 40x40, natural

0.0.452.25
Delivery unit:  PieceLength:  6000 Design:  StandardNumber of panels:  1Panel thickness range:  2-8.5 mm
Clamp Profile 8 40x40 E, natural

Clamp Profile 8 40x40 E, natural

0.0.436.92
Delivery unit:  Cut-offLength:  20 ... 6000Design:  EconomyNumber of panels:  1Panel thickness range:  2-8.5 mm
Clamp Profile 8 40x40 E, natural

Clamp Profile 8 40x40 E, natural

0.0.452.21
Delivery unit:  PieceLength:  6000 Design:  EconomyNumber of panels:  1Panel thickness range:  2-8.5 mm
Clamp Profile 8 40x40-180°, natural

Clamp Profile 8 40x40-180°, natural

0.0.429.95
Delivery unit:  Cut-offLength:  20 ... 6000Design:  StandardNumber of panels:  2Panel thickness range:  2-8.5 mm
Clamp Profile 8 40x40-180°, natural

Clamp Profile 8 40x40-180°, natural

0.0.452.26
Delivery unit:  PieceLength:  6000 Design:  StandardNumber of panels:  2Panel thickness range:  2-8.5 mm
Clamp Profile 8 40x40-180° light, natural

Clamp Profile 8 40x40-180° light, natural

0.0.483.36
Delivery unit:  Cut-offLength:  20 ... 6000Design:  LightNumber of panels:  2Panel thickness range:  2-6 mm
Clamp Profile 8 40x40-180° light, natural

Clamp Profile 8 40x40-180° light, natural

0.0.454.45
Delivery unit:  PieceLength:  6000 Design:  LightNumber of panels:  2Panel thickness range:  2-6 mm

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 6.0.1
23360101
eCl@ss 7.1
23360101
eCl@ss 8.0
23360101
UNSPSC 7.0
30152001
UNSPSC 9.0
30152001
eCl@ss 11.0
23360101
eCl@ss 4.0
35020106
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
Customs tariff number
76042100