Login
Cart

C-Rail Profile

Selected variant
C-Rail, Rail Profile 6, natural (0.0.451.52)
C-Rail, Rail Profile 6, natural
0.0.451.52
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number0.0.451.52
Lineline 6
ESD-safeNo
Cross-sectional areaA = 6.23 cm2
Moment of Inertia, torsionalIt = 1.09 cm4
Moment of Inertia, x-axisIx = 25.89 cm4
Moment of Inertia, y-axisIy = 5.19 cm4
Weightm = 1.68 kg/m
Delivery unit1 pce., length 6000 mm
MaterialAl, anodized
Colournatural
Resistance Moment, x-axisWx = 6.13 cm3
Resistance Moment, y-axisWy = 2.94 cm3

Description

Bearing Units K (without guiding shaft) or 1R (with 1 or 2 guiding shafts) or 3R are guided in the Rail Profiles.

Assembly Instructions

The following points must be taken into account when installing the guiding shafts:
> Preparation for pinning Shafts D10 or D14 by drilling a single blind hole into each shaft at any point using a carbide-tipped drill. Shaft D6 does not need to be pinned.
The Shaft is best drilled using the Combination Drilling Jig for Shafts (Section 9.2 Jigs and Tools).
> Drill the through bores into the C-Rail Profile at the same point.
> Press a dowel pin DIN 1481-4x10 into Shaft D10 or dowel pin DIN 1481-5x14 into Shaft D14.
> Using the Mounting Aid for Shafts (Section 9.2 Jigs and Tools), an appropriate round steel bar for a lever, and a profile for locating the Mounting Aid, the pre- greased guiding shafts are pressed into the C-Rail Profiles.

Variants

Sort by

C-Rail, Rail Profile 5, natural

C-Rail, Rail Profile 5, natural

0.0.460.01
Line:  5Delivery unit:  Cut-offLength:  20 ... 6000Guide type:  Shaft D6
C-Rail, Rail Profile 5, natural

C-Rail, Rail Profile 5, natural

0.0.448.25
Line:  5Delivery unit:  PieceLength:  6000 Guide type:  Shaft D6
C-Rail, Rail Profile 6, natural

C-Rail, Rail Profile 6, natural

0.0.461.01
Line:  6Delivery unit:  Cut-offLength:  20 ... 6000Guide type:  Shaft D10
C-Rail, Rail Profile 6, natural

C-Rail, Rail Profile 6, natural

0.0.451.52
Line:  6Delivery unit:  PieceLength:  6000 Guide type:  Shaft D10
C-Rail, Rail Profile 8, natural

C-Rail, Rail Profile 8, natural

0.0.462.01
Line:  8Delivery unit:  Cut-offLength:  20 ... 6000Guide type:  Shaft D14
C-Rail, Rail Profile 8, natural

C-Rail, Rail Profile 8, natural

0.0.452.52
Line:  8Delivery unit:  PieceLength:  6000 Guide type:  Shaft D14

Load Calculation

Deflection calculator

Force application
Orientation

Length is required

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23050703
eCl@ss 11.0
23050703
eCl@ss 6.0.1
23300202
eCl@ss 4.0
23050703
eCl@ss 4.1
23050703
eCl@ss 5.0
23050703
eCl@ss 5.1
23050703
eCl@ss 7.1
23050703
UNSPSC 9.0
31171506
UNSPSC 7.0
31171506
Customs tariff number
76042100