userMenu.login
cart.title

Profile 8 R26-270°

objectDetails.currentVariantLabel
Profile 8 R26-270°, natural (0.0.454.29)
Profile 8 R26-270°, natural
0.0.454.29
objectDetails.showAllVariants
cad.iconLink.title

technicalData.sectionHeadline

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

technicalData.propertiesHeadline

technicalData.articleNumber0.0.454.29
Lineline 8
ESD-safeYes
Cross-sectional areaA = 6,55 cm2
Moment of Inertia, torsionalIt = 11,9 cm4
Moment of Inertia, x-axisIx = 12,3 cm4
Moment of Inertia, y-axisIy = 11,1 cm4
Weightm = 1,77 kg/m
Delivery unit1 pce., length 6000 mm
MaterialAl, anodized
Permissible groove extraction forceF = 2500 N
Colournatural
Resistance Moment, x-axisWx = 4,67 cm3
Resistance Moment, y-axisWy = 4,27 cm3

description.sectionHeadline

Profile with round outer surface closed on three sides, with a Profile 8 light duty groove.
This is particularly useful as a table leg attached to one corner of a table structure. The Profile 8 groove can be used to connect the profile with any desired table support structure made of standard system elements. The fact that its exterior surface is closed on three sides makes it both stylish and easy to clean. The Cap 8 R26-270° (Section 1.2 Accessories for Profiles) can also be fitted at the bottom of the profile to protect the floor.
There are also many other possible uses, e.g. as a hand rail for installation on walls and profile structures.
The profile groove on one side can be closed off by means of a Cover Profile 8 R40 (Section 1.2 Accessories for Profiles) in order to produce a round profile contour without grooves.

variants.sectionHeadline

variants.mobile.label

variants.category.matchingSingle
Profile 8 R26-270°, natural

Profile 8 R26-270°, natural

0.0.454.29
Delivery unit:  PieceLength:  6000
variants.category.otherSingle
Profile 8 R26-270°, natural

Profile 8 R26-270°, natural

0.0.474.48
Delivery unit:  Cut-offLength:  20 ... 6000

loadCalculation.sectionHeadline

deflectionCalculator.header

deflectionCalculator.input.forceApplication.label
deflectionCalculator.input.orientation.label

inputValidation.required

accessoires.sectionHeadline

Cap 8 R26-270°, black
Cap 8 R26-270°, black
0.0.474.46

classifications.sectionHeadline

classifications.introduction
eCl@ss 8.0
35020190
UNSPSC 9.0
30102306
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
eCl@ss 11.0
23360101
eCl@ss 6.0.1
23360101
eCl@ss 4.0
35020106
eCl@ss 7.1
35020190
UNSPSC 7.0
30102306
classifications.customTariffsNumber
76042100