userMenu.login
cart.title

Track Profile 8 80x40

objectDetails.currentVariantLabel
Track Profile 8 80x40, natural (0.0.494.77)
Track Profile 8 80x40, natural
0.0.494.77
objectDetails.showAllVariants
cad.iconLink.title

technicalData.sectionHeadline

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

technicalData.propertiesHeadline

technicalData.articleNumber0.0.494.77
Lineline 8
ESD-safeYes
Cross-sectional areaA = 10,92 cm2
Moment of Inertia, torsionalIt = 2,93 cm4
Moment of Inertia, x-axisIx = 76,68 cm4
Moment of Inertia, y-axisIy = 12,79 cm4
Weightm = 2,84 kg/m
Delivery unit1 pce., length 6000 mm
MaterialAl, anodized
Colournatural
Resistance Moment, x-axisWx = 17,76 cm3
Resistance Moment, y-axisWy = 7,94 cm3

description.sectionHeadline

The system solution for constructing heavy-duty transport equipment consists of a special Track Profile and guided Rollers. Track Profile 8 80x40 is used as a guide rail for customised carriages equipped with Roller Units. Rollers D60 PU are ball-bearing mounted and are fitted with wear-resistant polyurethane tyres to ensure smooth and quiet running.
The pre-assembled Roller Units D60 PU can be fitted to workpiece carriers or frames constructed from profiles (preferably Line 8). The freely selectable support widths and axle distances of the carriage construction enable the guide to be constructed for the given application. The result is a system for manual or automatic transportation of even heavy products that is particularly robust and insensitive to ambient factors (dust and knocks).
Track Profiles and Roller Units are also ideal for constructing overhead suspension units.
An additional guide roller on the base plate guides Roller Unit D60 PU laterally in the Track Profile.
Connection dimensions and structure of a slide construction with Roller Unit D60 PU and Track Profile 8 80x40.
FR = 800 N
Rollers D60 PU can also be used as universal guide and support elements for pull-outs, as guide elements for sliding doors, and for all linear movements where flexibility and high load-bearing capacity are particularly important. They can be screwed from the outside (Countersunk Screw DIN 7981-M8) or inside (via the M10 internal thread) as required.
Roller D60 must always be fitted with the circlip facing outwards.

variants.sectionHeadline

variants.mobile.label

variants.category.matchingSingle
Track Profile 8 80x40, natural

Track Profile 8 80x40, natural

0.0.494.77
Delivery unit:  PieceLength:  6000
variants.category.otherSingle
Track Profile 8 80x40, natural

Track Profile 8 80x40, natural

0.0.606.69
Delivery unit:  Cut-offLength:  20 ... 6000

downloads.sectionHeadline

title

classifications.sectionHeadline

classifications.introduction
eCl@ss 8.0
23051590
eCl@ss 11.0
23051590
eCl@ss 4.0
23050310
eCl@ss 4.1
23050310
eCl@ss 5.0
23051501
eCl@ss 5.1
23051501
eCl@ss 6.0.1
23051501
eCl@ss 7.1
23051590
UNSPSC 9.0
31171506
UNSPSC 7.0
31171506
classifications.customTariffsNumber
76042100