userMenu.login
cart.title

Tube Holder D30

objectDetails.currentVariantLabel
Tube Holder 6 D30 (0.0.642.23)
Tube Holder 6 D30
0.0.642.23
objectDetails.showAllVariants
cad.iconLink.title

technicalData.sectionHeadline

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

technicalData.scopeOfDeliveryHeadline

Bracket D30, St, bright zinc-plated
2 T-Slot Nuts 6 St M6, St, bright zinc-plated
2 Countersunk Screws DIN 7991 M6x12, St, bright zinc-plated
Countersunk Screw DIN 7991 M6x20, St, bright zinc-plated

technicalData.propertiesHeadline

technicalData.articleNumber0.0.642.23
LineLine D30
ESD-safeYes
Weightm = 69 g
Delivery unit1 set
Max. load-carrying capacityF = 500 N
TorqueM = 20 Nm

description.sectionHeadline

From round to square: Tube Holders D30 can be used to fasten a (Profile) Tube D30 between two profiles from the item MB Building Kit System. This space-saving and strong holder is available for Line 6 and 8 grooves.
Tube Holders D30 are fastened to the Profile Tube D30 or Tube D30 with an M6 screw. A Threaded Insert D30 must be used to make this fixing. In the case of Profiles 6 D30, a thread is tapped into the core bore.
When round meets square.
Making it easy to connect the Line D30 with Line 8 or Line 6.
Thanks to this solution, the cylindrical tube system of Line D30 can be used to extend or reinforce a conventionally designed application based on the MB system.

description.assemblyHeadline

variants.sectionHeadline

variants.mobile.label

Rohrhalter 8 D30

Rohrhalter 8 D30

0.0.642.05
Nuttyp:  8 mmGewindelänge:  10.7
Rohrhalter 6 D30

Rohrhalter 6 D30

0.0.642.23
Nuttyp:  6 mmGewindelänge:  8.7

downloads.sectionHeadline

title

classifications.sectionHeadline

classifications.introduction
eCl@ss 8.0
36120490
eCl@ss 7.1
36120490
eCl@ss 4.0
36121505
eCl@ss 6.0.1
36120490
eCl@ss 11.0
36120490
eCl@ss 4.1
36121505
eCl@ss 5.0
36129190
eCl@ss 5.1
36129190
UNSPSC 9.0
24101709
UNSPSC 7.0
24101709
classifications.customTariffsNumber
83024900