userMenu.login
cart.title

Steel Mesh Fixing Block 8 Zn

0.0.725.22

cad.iconLink.title

technicalData.sectionHeadline

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

technicalData.scopeOfDeliveryHeadline

1 Steel Mesh Fixing Block 8, Zn, bright zinc-plated
1 grub screw DIN 916 M6x10, St, bright zinc-plated

technicalData.propertiesHeadline

technicalData.articleNumber0.0.725.22
TorqueM = 1.5 Nm
Lineline 8
ESD-safeNo
Weightm = 25 g
Delivery unit1 set

description.sectionHeadline

Steel Mesh Fixing Block 8 Zn fastens mesh with a wire diameter of 3.8 mm to a Line 8 groove without requiring any machining work. The mesh fixing element helps ensure enclosures and guards with a Steel Mesh infill can be built efficiently.
To construct a guard safely, the panel element must be secured using at least three Steel Mesh Fixing Blocks in each groove.
To achieve a load capacity of 115 J in line with DIN EN ISO 14120:2016, three Steel Mesh Fixing Blocks need to be fitted per 1000 mm. Using four Steel Mesh Fixing Blocks per 1000 mm increases this capacity to 329 J.

description.assemblyHeadline

1. Before swivelling a Steel Mesh Fixing Block into the groove, ensure that the notch in the clamp is fully enclosing a section of wire in the mesh
2. Tighten the set screw to secure the fixing block in the groove
The following grid pattern is required for the design and assembly of the Steel Mesh Fixing Block 8 Zn (0.0.725.22) in the system groove 8 when cutting Steel Mesh 3.8 mm 40×40, black (0.0.428.39).

downloads.sectionHeadline

title

classifications.sectionHeadline

classifications.introduction
UNSPSC 9.0
31101508
UNSPSC 7.0
31101508
eCl@ss 8.0
23240190
eCl@ss 4.0
22041426
eCl@ss 4.1
22041426
eCl@ss 5.0
23250320
eCl@ss 5.1
23250320
eCl@ss 6.0.1
23250320
eCl@ss 11.0
23240190
eCl@ss 7.1
23240190
classifications.customTariffsNumber
79070000