Login
Cart

Central-Fastening Set P

Selected variant
Central-Fastening Set P 6 (0.0.713.37)
Central-Fastening Set P 6
0.0.713.37
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 clamping pin, St, bright zinc-plated
1 T-Slot Nut 6 St M5, bright zinc-plated
1 sleeve with hole, St, bright zinc-plated
1 grub screw M6, St, bright zinc-plated

Properties

Article number0.0.713.37
Lineline 6
ESD-safeYes
Weightm = 17 g
Delivery unit1 set

Description

Central-Fastening Set P 6 is used to connect parallel Line 6 profiles. As a result, separate inherently stable guard and partition elements can be very quickly connected together in series. A height offset can also be subsequently evened out.

Assembly Instructions

In order to use the fastener, one of the profiles needs to have one hole drilled into it for the fastener sleeve and another for the clamping pin.
Installation sequence for Central-Fastening Set P 6:
1. Drill holes into profile 1 and insert the fastener sleeve
2. Swivel the T-Slot Nut into the groove of profile 2 and screw in the clamping pin until the lower edge of the sleeve is flush with the surface of the profile
3. Move the T-Slot Nut and clamping pin to the correct position in the groove and put the profiles together
4. Tighten the connection with the M6 grub screw (tightening torque M = 3.5 Nm)
5. To release the connection, remove the grub screw

Variants

Sort by

Central-Fastening Set P 8

Central-Fastening Set P 8

0.0.619.69
Line:  8Groove type:  8 mmThread:  M8
Central-Fastening Set P 6

Central-Fastening Set P 6

0.0.713.37
Line:  6Groove type:  6 mmThread:  M6

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
UNSPSC 9.0
31162503
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.0
22041424
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
83024200