item
Drive Pulley

Drive Pulley


Show all 10 variants
On request

Technical Data

Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 drive pulley, St
2 self-aligning ball bearings DIN 630

Properties

Article number 0.0.702.88
Line FT
ESD-safe Yes
Weight m = 642 g
Delivery unit 1 pce.
Status on delivery Preassembled

Description

Drive Pulley, Flat Belt Conveyor 8 40 supports even belt travel. Two-row self-aligning ball bearings compensate for potential axial misalignment.
The drive pulley is secured in place with Drive Unit Set 8 40 (0.0.702.72). Thanks to blind holes on both sides, Expanding Hub Coupling D16/d13 can be used to connect a motor to either the right or left-hand side of the flat belt conveyor.
The recommended conveyor belt width is 35 mm.

Variants

Sort by

Fördertyp:  Gurtförderer Gesamtbreite:  40 mm
Fördertyp:  Gurtförderer Gesamtbreite:  80 mm
Fördertyp:  Gurtförderer Gesamtbreite:  120 mm
Fördertyp:  Gurtförderer Gesamtbreite:  160 mm
Fördertyp:  Gurtförderer Gesamtbreite:  200 mm
Fördertyp:  Gurtförderer Gesamtbreite:  240 mm
Fördertyp:  Gurtförderer Gesamtbreite:  320 mm
Fördertyp:  Gurtförderer Gesamtbreite:  400 mm
Fördertyp:  Zahnriemenförderer Gesamtbreite:  40 mm
Fördertyp:  Zahnriemenförderer Gesamtbreite:  80 mm

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 5.0
23170209
eCl@ss 5.1
23170209
eCl@ss 6.0.1
23170209
eCl@ss 7.1
23170209
eCl@ss 8.0
23170209
eCl@ss 11.0
23170209
eCl@ss 4.0
23170301
eCl@ss 4.1
23170301
UNSPSC 9.0
26111504
UNSPSC 7.0
26111504
Customs tariff number
84313900