Flat Belt Conveyor 8 40 D

Flat Belt Conveyor 8 40 D


This item is not directly orderable.
configure now

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.


Article number 0.0.711.32
Axle spacing on LA = 500–6000 mm
Drive arrangement Output side left/right
Drive position 0°; 90°; 180°; 270°
Line line 8
Line FT
Total width of conveyor BG = 40, 80, 120, 160, 200, 240, 320, 400 mm
Delivery unit 1 pce.
Max. total load (non-accumulating) 100 kg
Max. total load (accumulating) 45 kg
Max. line load 25 kg/m
Nominal voltage Un = 230/400 V
Transportbandgeschwindigkeit V TB = 2.5–28.9 m/min
Conveyor belt width BT = BG-10 (but BG-5 if BG = 40 or 80)


Flat Belt Conveyor 8 40 D is available in eight widths up to 400 mm and in lengths up to 6000 mm. This continuous flat belt facilitates the efficient transportation of unit loads, including loads with irregular bases.
The stable load-bearing frame with two freely accessible Line 8 grooves makes it easier to attach accessories, connect stands and integrate machines.
Depending on the type of belt used, Flat Belt Conveyor 8 40 D can either have reduced static friction to enable accumulation or be designed to keep workpieces moving on an incline of up to 20°. A low-friction glide plate made of 2 mm stainless steel gives the belt additional support.


Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0.1
eCl@ss 7.1
eCl@ss 8.0
eCl@ss 11.0
Customs tariff number