item
Timing Belt Guide Strip

Timing Belt Guide Strip


Show all 4 variants
20 2,000
This item is not directly orderable.
Use in Engineeringtool
* Mandatory information

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number 0.0.702.99
Line line 8
Line FT
ESD-safe Yes
Weight, spec. Length m = 134 g/m
Delivery unit cut-off max. 2000 mm
Material PE-UHMW
Colour black

Description

Timing Belt Guide Strip 8 40-40 is a low-friction underlay with a guide lip on each side that is designed to accommodate Timing Belts T5-40. The whole of the timing belt is in contact with the guide strip on the upper run of the timing belt conveyor.
The guide strip is ESD-safe to DIN EN 61340 and is pressed into the groove of a Line 8 profile between the intake and outlet sections of the drive and return pulleys.
When calculating the length for your timing belt guide strip, please bear in mind the intake/outlet section that is automatically supplied with the drive and return pulleys.
Tip: Use the item Engineeringtool to make sure you don’t miss a detail when designing your timing belt conveyor

Variants

Sort by

Liefereinheit:  Zuschnitt Länge:  20 ... 2000 Gurtbreite:  40 mm
Liefereinheit:  Stück Länge:  2010 Gurtbreite:  40 mm
Liefereinheit:  Zuschnitt Länge:  20 ... 2000 Gurtbreite:  80 mm
Liefereinheit:  Stück Länge:  2010 Gurtbreite:  80 mm

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23240190
eCl@ss 4.0
22041415
eCl@ss 4.1
22041415
UNSPSC 9.0
31162703
eCl@ss 5.0
23210192
eCl@ss 5.1
23210192
eCl@ss 6.0.1
23210192
UNSPSC 7.0
31162703
eCl@ss 11.0
23240190
eCl@ss 7.1
23240190
Customs tariff number
39161000