Login
Cart

Fastener D30

Selected variant
Ball Joint Fastener D30 (0.0.646.85)
Ball Joint Fastener D30
0.0.646.85
Show all
* Mandatory information
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

2 ball joint fastener halves, ball head, die-cast Al, natural
2 ball joint fastener halves, ball socket, die-cast Al, natural
2 Hexagon Socket Head Cap Screws similar to DIN 912 M6x29.4, St, bright zinc-plated
2 Hexagon nuts DIN 934 M6-I8I, St, bright zinc-plated

Properties

Article number0.0.646.85
LineLine D30
ESD-safeYes
Weightm = 205 g
Delivery unit1 pce.
Status on deliveryPreassembled
TorqueM = 10 Nm

Description

Turning on a pin. Ball Joint Fasteners are used to install struts at any angle in the flick of a wrist. A stable integral ball in the fastener produces this versatility. It enables users to twist and turn the fastener to the desired angle and fix it in place with a single screw.
The Ball Joint Fasteners can be turned through 180° in all directions. As a result, they are ideal for fastenings in any spatial arrangement.
Ball Joint Fastener 8 D30 incorporates a flange plate that enables connection to a Line 8 Profile.

Variants

Sort by

Fastener D30

Fastener D30

0.0.623.56
Connection type:  Right angledMounting type:  OutsideAngular position:  0°2nd type:  SingleAnti-torsion feature:  Separate anti-torsion feature
Fastener D30-45°

Fastener D30-45°

0.0.637.87
Connection type:  Angular positionMounting type:  OutsideAngular position:  45°2nd type:  SingleAnti-torsion feature:  Separate anti-torsion feature
Fastener D30 T1

Fastener D30 T1

0.0.687.84
Connection type:  Right angledMounting type:  OutsideAngular position:  0°2nd type:  DoubleAnti-torsion feature:  Integrated anti-torsion feature (T1)
Fastener D30 T2

Fastener D30 T2

0.0.728.51
Connection type:  Right angledMounting type:  OutsideAngular position:  0°2nd type:  DoubleAnti-torsion feature:  Separate anti-torsion feature
Fastener D30, internal

Fastener D30, internal

0.0.669.52
Connection type:  Right angledMounting type:  InsideAngular position:  0°2nd type:  DoubleAnti-torsion feature:  None
Fastener D30-45°, internal

Fastener D30-45°, internal

0.0.678.66
Connection type:  Angular positionMounting type:  InsideAngular position:  45°2nd type:  DoubleAnti-torsion feature:  None
Ball Joint Fastener D30

Ball Joint Fastener D30

0.0.646.85
Connection type:  Angular positionMounting type:  OutsideAngular position:  -90° to +90° / 0° to +360°2nd type:  SingleAnti-torsion feature:  Separate anti-torsion feature
Fastener D30 with Clamp Lever

Fastener D30 with Clamp Lever

0.0.644.77
Connection type:  Right angledMounting type:  OutsideAngular position:  0°2nd type:  SingleAnti-torsion feature:  Separate anti-torsion feature
Fastener D30, internal, Connector M6-12

Fastener D30, internal, Connector M6-12

0.0.690.44
Connection type:  Right angledMounting type:  ThreadAngular position:  0°2nd type:  DoubleAnti-torsion feature:  None
Fastener D30-45°, internal, Connector M6-12

Fastener D30-45°, internal, Connector M6-12

0.0.692.12
Connection type:  Angular positionMounting type:  ThreadAngular position:  45°2nd type:  DoubleAnti-torsion feature:  None

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 7.1
23360290
UNSPSC 9.0
31162503
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
eCl@ss 4.0
22041424
UNSPSC 7.0
31162503
Customs tariff number
83024900