item
Fastener D30

Fastener D30

Selected variant
Fastener D30 (0.0.623.56)
Fastener D30
0.0.623.56
Show all
On request
* Mandatory information
Use in Engineeringtool Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Preassembled
2 fastener halves, die-cast Al, natural
Hexagon Socket Head Cap Screw similar to DIN 912 M6x29.4, St, bright zinc-plated
Hexagon nut DIN 934 M6-I8I, St, bright zinc-plated

Properties

Article number 0.0.623.56
Line Line D30
ESD-safe Yes
Weight m = 105 g
Delivery unit 1 pce.
Status on delivery Preassembled
Torque M = 10 Nm

Description

The universal 90°connection – die-cast aluminium Fastener D30 produces a lasting hold with no creep behaviour. It creates a mechanically locked connection with the contour of a Profile Tube D30 or Profile 6 D30. Up to four Fasteners can be connected to intersection points on a Profile Tube. No special fasteners are required! Tube Adapter D30 is used to connect to a Tube D30. Fastener D30 helps to compensate for tolerances. It consists of two half shells that encompass Tubes and Profile Tubes D30 to ensure a secure hold. A direct conductive contact is always ensured because aluminium is in contact with aluminium.
Fastener D30 is supplied preassembled, which saves time on assembly operations. Simply insert the Tube, position the Fastener and tighten. The connection is immediately secure, meaning that one person can build a frame independently.
Fastener D30
Fx = 500 N
Fz = 500 N
Mx = 5 Nm
My = 50 Nm
Mz = 20 Nm
The universal 90°connection – die-cast aluminium Fastener D30 produces a lasting hold with no creep behaviour. It creates a mechanically locked connection with the contour of a Profile Tube D30 or Profile 6 D30. Up to four Fasteners can be connected to intersection points on a Profile Tube. No special fasteners are required! Tube Adapter D30 is used to connect to a Tube D30. Fastener D30 helps to compensate for tolerances. It consists of two half shells that encompass Tubes and Profile Tubes D30 to ensure a secure hold. A direct conductive contact is always ensured because aluminium is in contact with aluminium.
Fastener D30 is supplied preassembled, which saves time on assembly operations. Simply insert the Tube, position the Fastener and tighten. The connection is immediately secure, meaning that one person can build a frame independently.
Stay in alignment: Anti-Torsion Blocks 6 D30 ensure that Profile Tubes D30 and Profiles 6 D30 are always oriented perfectly inside Fasteners D30 that use external clamping technology. This helps make sure accessories end up in the right place. Anti-Torsion Block 6 D30-45° makes it easier to connect diagonal struts at an angle of 45° by positioning the profile flanks perfectly.

Variants

Sort by

Fastener D30

Fastener D30

0.0.623.56
Connection type:  Right angled Mounting type:  Outside Angular position:  0° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30-45°

Fastener D30-45°

0.0.637.87
Connection type:  Angular position Mounting type:  Outside Angular position:  45° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30 T1

Fastener D30 T1

0.0.687.84
Connection type:  Right angled Mounting type:  Outside Angular position:  0° 2nd type:  Double Anti-torsion feature:  Integrated anti-torsion feature (T1)
Fastener D30, internal

Fastener D30, internal

0.0.669.52
Connection type:  Right angled Mounting type:  Inside Angular position:  0° 2nd type:  Double Anti-torsion feature:  None
Fastener D30-45°, internal

Fastener D30-45°, internal

0.0.678.66
Connection type:  Angular position Mounting type:  Inside Angular position:  45° 2nd type:  Double Anti-torsion feature:  None
Ball Joint Fastener D30

Ball Joint Fastener D30

0.0.646.85
Connection type:  Angular position Mounting type:  Outside Angular position:  -90° to +90° / 0° to +360° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30 with Clamp Lever

Fastener D30 with Clamp Lever

0.0.644.77
Connection type:  Right angled Mounting type:  Outside Angular position:  0° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30, internal, Connector M6-12

Fastener D30, internal, Connector M6-12

0.0.690.44
Connection type:  Right angled Mounting type:  Thread Angular position:  0° 2nd type:  Double Anti-torsion feature:  None
Fastener D30-45°, internal, Connector M6-12

Fastener D30-45°, internal, Connector M6-12

0.0.692.12
Connection type:  Angular position Mounting type:  Thread Angular position:  45° 2nd type:  Double Anti-torsion feature:  None

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
UNSPSC 9.0
31162503
eCl@ss 4.0
22041424
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
76169910