item
Flange 8 D30

Flange 8 D30

Selected variant
Flange 8 D30 90x40-80 180° (0.0.701.44)
Flange 8 D30 90x40-80 180°
0.0.701.44
Show all
On request
Use in Engineeringtool Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Partially preassembled
Flange D30 180°, St, bright zinc-plated
2 grub screws DIN 913 M10x8, St, bright zinc-plated
2 Hexagon Socket Head Cap Screws DIN 912 M8x16, St, bright zinc-plated
2 T-Slot Nuts V 8 St M8, St, bright zinc-plated

Properties

Article number 0.0.701.44
Line Line D30
ESD-safe Yes
Weight m = 435 g
Delivery unit 1 set
Status on delivery Partially preassembled

Description

Secure hold on substructures! Flange 8 D30 90x90-80 180° and Flange 8 D30 90x40-80 90° add two wings to a D30 connector, which reliably absorb lateral forces. This ensures a particularly rigid connection when attaching a tube construction to a Line 8 profile.
The wings on Flange 8 D30 90x40-80 180° are arranged opposite each other, while the wings on Flange 8 D30 90x90-80 90° are at a right angle to each other. The latter Flange is therefore suitable for fastening Profile Tubes D30 to the corners of a supporting frame on a tugger train.
Due to the forces that are generated, item recommends always using the Flange with a (Profile) Tube D30 heavy duty. As is usually the case in Profile Tube System D30, the M10 grub screws are tightened using a 5 A/F key.
Note: The two holes for fastening to a Line 8 groove are not located in line with the modular dimension of Profile Tube System D30.
Note: In addition to the maximum load-carrying capacity of the Flange, it is important to take into account the load limits of the adjacent components in the construction.
My = 150 Nm
Fz = 1000 N

Variants

Sort by

Kołnierz 8 D30 90x40-80 180°

Kołnierz 8 D30 90x40-80 180°

0.0.701.44
Kształt konstrukcji:  Kształt I
Kołnierz 8 D30 90x90-80 90°

Kołnierz 8 D30 90x90-80 90°

0.0.701.45
Kształt konstrukcji:  Kształt L

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
UNSPSC 9.0
31162503
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.0
22041424
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
73079100