item
Double Profile Tube

Double Profile Tube

Selected variant
Double Profile Tube D30-60, natural (0.0.681.55)
Double Profile Tube D30-60, natural
0.0.681.55
Show all
On request
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number 0.0.681.55
Line Line D30
ESD-safe Yes
Cross-sectional area A = 4.54 cm2
Moment of Inertia, torsional It = 4.95 cm4
Moment of Inertia, x-axis Ix = 39.37 cm4
Moment of Inertia, y-axis Iy = 3.43 cm4
Weight m = 1.227 kg/m
Delivery unit 1 pce., length 6000 mm
Material Al, anodized
Colour natural
Resistance Moment, x-axis Wx = 8.75 cm3
Resistance Moment, y-axis Wy = 2.29 cm3

Description

It takes two! Double Profile Tube D30-60 consists of two Profile Tubes D30 that are connected by an unbroken aluminium web. The web considerably increases rigidity compared to two Profile Tubes D30 that are not connected.
Double Profile Tube D30-60 is perfect for use as a long horizontal beam in racks. It can also be installed as a vertical strut or load-bearing rib under a worksurface.
Note: Fastener D30 T1 (0.0.687.84), which has a narrow gap at the side, is used to connect the profile tube via its end face. Fastener D30, internal (0.0.669.52) can be used to create a smooth 90° connection that has a lower load-carrying capacity.
Permissible loads for constructions built with Double Profile Tube D30-60.
The diagram shows the permitted load in relation to support span a. It is based on the maximum permissible deflection set by item, which is 1/100 of the support span. When designing rack structures, please observe the limit values set out in the relevant statutory regulations (e.g. DGUV regulation 108-007 in Germany).

Variants

Sort by

1/2 variants match "Piece"
Doppel-Profilrohr D30-60, natur

Doppel-Profilrohr D30-60, natur

0.0.681.55
Liefereinheit:  Stück Länge:  6000
More variants in this product family
Doppel-Profilrohr D30-60, natur

Doppel-Profilrohr D30-60, natur

0.0.682.60
Liefereinheit:  Zuschnitt Länge:  20 ... 6000

Load Calculation

Deflection calculator

Force application
Orientation
20 6,000

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360101
eCl@ss 11.0
23360101
eCl@ss 7.1
23360101
UNSPSC 9.0
30102306
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
eCl@ss 6.0.1
23360101
eCl@ss 4.0
35020106
UNSPSC 7.0
30102306
Customs tariff number
76042100