item
Synchronising Shaft Profile

Synchronising Shaft Profile

Selected variant
Synchronising Shaft Profile VK32, natural (0.0.463.56)
Synchronising Shaft Profile VK32, natural
0.0.463.56
Show all
20 3,000
On request
* Mandatory information
Get CAD Data and Downloads

Technical Data

All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number 0.0.463.56
Torque max. Mmax. = 100 Nm
ESD-safe No
Cross-sectional area A = 11.62 cm2
Moment of Inertia, torsional It = 65.95 cm4
Moment of Inertia, x-axis Ix = 47.42 cm4
Moment of Inertia, y-axis Iy = 45.09 cm4
Weight m = 3.13 kg/m
Delivery unit cut-off max. 3000 mm
Material Al, anodized
Colour natural

Description

Synchronising Shaft Profiles are used to construct synchronising shafts using Multi-Spline Shaft sections VK14 or VK32.
The synchronising shafts can be used to connect and thus to synchronise dynamic elements such as Timing-Belt Reverse Units, Ball Screw Units and couplings etc.
By using Multi-Spline Shaft sections which go all the way through the Timing-Belt Reverse Units, it is possible to transfer the permissible torque.
A positive-lock connection is used to connect shafts to the Synchronising Shaft Profiles. A Synchroniser Shaft Equaliser Coupling enables the torsion angle to be set.
Use of a synchronising shaft for connecting two Timing-Belt Reverse Units.
The length of a Multi-Spline Shaft section depends on the minimum penetration depth (d), the construction sizes of the connected dynamic elements and the gap between the rotating and fixed parts.
d = > 60 mm
The mounting holes for the tensioning screws are drilled perpendicular to the profile’s centre axis along the marking grooves.
The tensioning screws are tightened through the mounting holes drilled earlier.
Permissible synchroniser shaft speed in relation to length

Variants

Sort by

Synchronising Shaft Profile VK32, natural

Synchronising Shaft Profile VK32, natural

0.0.463.56
Delivery unit:  Cut-off Length:  20 ... 3000 Drive type:  spline shaft VK32
Synchronising Shaft Profile VK32, natural

Synchronising Shaft Profile VK32, natural

0.0.454.05
Delivery unit:  Piece Length:  3000 Drive type:  spline shaft VK32
Synchronising Shaft Profile VK14, natural

Synchronising Shaft Profile VK14, natural

0.0.463.57
Delivery unit:  Cut-off Length:  20 ... 3000 Drive type:  spline shaft VK14
Synchronising Shaft Profile VK14, natural

Synchronising Shaft Profile VK14, natural

0.0.454.04
Delivery unit:  Piece Length:  3000 Drive type:  spline shaft VK14

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23029190
eCl@ss 11.0
35070402
eCl@ss 6.0.1
23029090
eCl@ss 7.1
23020501
eCl@ss 4.0
23030701
eCl@ss 4.1
23030701
eCl@ss 5.0
23020301
eCl@ss 5.1
23020301
UNSPSC 7.0
26111510
UNSPSC 9.0
26111510
Customs tariff number
76042100