Login
Cart

Synchronising Shaft Profile

Selected variant
Synchronising Shaft Profile VK14, natural (0.0.454.04)
Synchronising Shaft Profile VK14, natural
0.0.454.04
Show all
Get CAD Data and Downloads

Technical Data

All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number0.0.454.04
Torque max.Mmax. = 28 Nm
ESD-safeNo
Cross-sectional areaA = 4.77 cm2
Moment of Inertia, torsionalIt = 9.52 cm4
Moment of Inertia, x-axisIx = 7.17 cm4
Moment of Inertia, y-axisIy = 6.68 cm4
Weightm = 1.29 kg/m
Delivery unit1 pce., length 3000 mm
MaterialAl, anodized
Colournatural

Description

Synchronising Shaft Profiles are used to construct synchronising shafts using Multi-Spline Shaft sections VK14 or VK32.
The synchronising shafts can be used to connect and thus to synchronise dynamic elements such as Timing-Belt Reverse Units, Ball Screw Units and couplings etc.
By using Multi-Spline Shaft sections which go all the way through the Timing-Belt Reverse Units, it is possible to transfer the permissible torque.
A positive-lock connection is used to connect shafts to the Synchronising Shaft Profiles. A Synchroniser Shaft Equaliser Coupling enables the torsion angle to be set.
The clamping set contains all parts required for fastening the Multi-Spline Shaft sections to both ends of a Synchronising Shaft Profile.
Snap Rings W should be used to secure the Synchroniser Shaft axially between the drive elements.
Use of a synchronising shaft for connecting two Timing-Belt Reverse Units.
The length of a Multi-Spline Shaft section depends on the minimum penetration depth (d), the construction sizes of the connected dynamic elements and the gap between the rotating and fixed parts.
d = > 40 mm
The mounting holes for the tensioning screws are drilled perpendicular to the profile’s centre axis along the marking grooves.
The tensioning screws are tightened through the mounting holes drilled earlier.
The permissible speed of a Synchroniser Shaft depends on its length.

Variants

Sort by

Synchronising Shaft Profile VK32, natural

Synchronising Shaft Profile VK32, natural

0.0.463.56
Delivery unit:  Cut-offLength:  20 ... 3000Drive type:  spline shaft VK32
Synchronising Shaft Profile VK32, natural

Synchronising Shaft Profile VK32, natural

0.0.454.05
Delivery unit:  PieceLength:  3000 Drive type:  spline shaft VK32
Synchronising Shaft Profile VK14, natural

Synchronising Shaft Profile VK14, natural

0.0.463.57
Delivery unit:  Cut-offLength:  20 ... 3000Drive type:  spline shaft VK14
Synchronising Shaft Profile VK14, natural

Synchronising Shaft Profile VK14, natural

0.0.454.04
Delivery unit:  PieceLength:  3000 Drive type:  spline shaft VK14

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23029190
eCl@ss 6.0.1
23029090
eCl@ss 11.0
35070402
eCl@ss 4.0
23030701
eCl@ss 4.1
23030701
eCl@ss 5.0
23020301
eCl@ss 5.1
23020301
UNSPSC 9.0
26111510
eCl@ss 7.1
23020501
UNSPSC 7.0
26111510
Customs tariff number
76042100