item
Drive Unit Set 8 40

Drive Unit Set 8 40

0.0.702.72

On request
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 drive unit 8 40 left, Al, barrel-finished
1 drive unit 8 40 right, Al, barrel-finished
1 cap 8 40, PA6, ESD, black
1 positioning ring, conveyor belt 8 40, PA6, ESD, black
1 circlip DIN 472-38x1.5, St
2 Hexagon Socket Head Cap Screws DIN 6912 M8x14, St, bright zinc-plated

Properties

Article number 0.0.702.72
Torque M = 10 Nm
Line line 8
Line FT
ESD-safe Yes
Weight m = 434 g
Force max Fmax. = 950 N
Delivery unit 1 set
Status on delivery Partially preassembled

Description

Drive Unit Set 8 40 has two functions. Firstly, it acts as a bearing, connecting the drive pulley of a flat belt or timing belt conveyor to the frame of the conveyor belt. An integral tensioning screw that lies in the profile groove can be used to adjust pre-tensioning. Secondly, when combined with the appropriate Motor Fastening Set, it is used to mount the drive on either the right or left side of the conveyor belt.
The drive units are the primary means of adjusting pre-tensioning and the run of the belt.
In the case of flat belt conveyors, the belt can also be precisely adjusted to run straight at the Return Unit Set by using Fine Adjuster Set 8 (0.0.715.05).

Accessoires

Flat Belt Conveyor 8 40 D
Flat Belt Conveyor 8 40 D
0.0.711.32
Double Flat Belt Conveyor 8 40 D
Double Flat Belt Conveyor 8 40 D
0.0.711.33
Timing Belt Conveyor 8 40 D
Timing Belt Conveyor 8 40 D
0.0.711.34
Double Timing Belt Conveyor 8 40 D
Double Timing Belt Conveyor 8 40 D
0.0.711.35
Motor Fastening Set 8 40 D14
Motor Fastening Set 8 40 D14
0.0.705.73
Motor Fastening Set 8 40 D16
Motor Fastening Set 8 40 D16
0.0.703.11
Drive Pulley, Flat Belt Conveyor 8 40-40
Drive Pulley, Flat Belt Conveyor 8 40-40
0.0.702.88
Drive Pulley, Flat Belt Conveyor 8 40-80
Drive Pulley, Flat Belt Conveyor 8 40-80
0.0.705.06
Drive Pulley, Flat Belt Conveyor 8 40-120
Drive Pulley, Flat Belt Conveyor 8 40-120
0.0.705.07
Drive Pulley, Flat Belt Conveyor 8 40-160
Drive Pulley, Flat Belt Conveyor 8 40-160
0.0.705.08
Drive Pulley, Flat Belt Conveyor 8 40-200
Drive Pulley, Flat Belt Conveyor 8 40-200
0.0.705.09
Drive Pulley, Flat Belt Conveyor 8 40-240
Drive Pulley, Flat Belt Conveyor 8 40-240
0.0.705.10
Drive Pulley, Flat Belt Conveyor 8 40-320
Drive Pulley, Flat Belt Conveyor 8 40-320
0.0.705.11
Drive Pulley, Flat Belt Conveyor 8 40-400
Drive Pulley, Flat Belt Conveyor 8 40-400
0.0.705.12
Drive Pulley, Timing Belt Conveyor 8 40-40
Drive Pulley, Timing Belt Conveyor 8 40-40
0.0.709.27
Drive Pulley, Timing Belt Conveyor 8 40-80
Drive Pulley, Timing Belt Conveyor 8 40-80
0.0.709.28
Ball-Headed Key 4 A/F
Ball-Headed Key 4 A/F
0.0.406.60
Key with T-Handle 4 A/F
Key with T-Handle 4 A/F
0.0.406.39
Key with T-Handle 6 A/F
Key with T-Handle 6 A/F
0.0.406.38

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 4.0
36121405
eCl@ss 4.1
36121405
eCl@ss 6.0.1
36129104
eCl@ss 7.1
36129104
eCl@ss 8.0
36129104
eCl@ss 11.0
36120491
UNSPSC 9.0
31163001
UNSPSC 7.0
31163001
eCl@ss 5.0
36129190
eCl@ss 5.1
36129190
Customs tariff number
84313900