item
Synchronising Set M

Synchronising Set M

Selected variant
Synchronising Set 8 40 M D13/D14 (0.0.727.05)
Synchronising Set 8 40 M D13/D14
0.0.727.05
Show all
On request
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 flange for Synchronising Set 8 40 M, Al
1 cover for drive pulley 8 40 M, Al
1 expanding hub coupling D16/d13, Al/St/TPU
1 clamping hub coupling D16/D16, Al/TPU
1 drive shaft D14, St, black
1 parallel key DIN 6885-A-5x5x25, St
1 positioning ring for conveyor belt 8 40, PA, ESD, black
1 Safety Seal, Warning Notice for Rotating Components
4 Hexagon Socket Head Cap Screws DIN 912 M6x8, St, bright zinc-plated
4 Countersunk Screws DIN 7991 M6x16, St, bright zinc-plated

Properties

Article number 0.0.727.05
Line line 8
Line FT
ESD-safe No
Weight m = 528 g
Delivery unit 1 set

Description

Synchronising Set 8 40 M D13/D16 is used to run two conveyor belts in parallel with a centre drive and a Motor AC D11 coupled with a Bevel Gearbox D14/D11.
The Synchronising Set connects the Gearbox, which is fastened to a centre drive with a Motor Fastening Set M, to the Drive Pulley of the second conveyor belt. It can also be retrofitted.
Tube D16x1.5 St (0.0.664.14) is used as the synchroniser shaft. Synchroniser Shaft Cover Profile 8 40 (0.0.710.31) safely covers over this Tube D16x1.5.
Note: The Tube and Synchroniser Shaft Cover Profile must be ordered separately in the required length.
Calculating the length of the tube (LR) and Synchroniser Shaft Cover Profile (LP) in relation to the belt width (BG)

Variants

Sort by

Synchronising Set 8 40 M D13/D14

Synchronising Set 8 40 M D13/D14

0.0.727.05
Shaft diameter:  D14
Synchronising Set 8 40 M D13/D16

Synchronising Set 8 40 M D13/D16

0.0.727.04
Shaft diameter:  ø 16 mm

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23031101
eCl@ss 11.0
23031101
eCl@ss 6.0.1
23029090
eCl@ss 4.0
23030701
eCl@ss 4.1
23030701
eCl@ss 5.0
23020301
eCl@ss 5.1
23020301
eCl@ss 7.1
23020501
UNSPSC 9.0
31163001
UNSPSC 7.0
31163001
Customs tariff number
84879090