Login
Cart

Chain 1/2"

Selected variant
Chain 1/2″ (0.0.465.17)
Chain 1/2″
0.0.465.17
Show all
* Mandatory information
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Technical note

Pitch p = 12.7 mm corresponding to ½″
Operating load = max. 1,400 N
Elongation at 1,400 N = 2.5 - 3 ‰

Properties

Article number0.0.465.17
Lineline 8
ESD-safeNo
Weightm = 215 g/m
Force maxFmax. = 1 400 N
Delivery unitcut-off max. 25 m in 1″ intervals
MaterialSt, nickel-plated

Description

In Karakuri/LCA applications, the chain can be used as an alternative to a cable and is connected to profiles that serve as end points using Chain Fastener 1/2" M6-50 (0.0.708.59). A Sprocket Wheel z16 D34.8-5.2 (0.0.714.48) is used to transfer forces to other components.
On Linear Units and in dynamic applications, Chain 1/2" is routed through the profile groove. It can be accessed through the groove and can be used to transfer drive forces.
No fastening elements can be fitted in the profile grooves where the chain is run.

Assembly Instructions

Chain 1/2" can be opened and closed with a chain tool. A simpler alternative is to use Chain Link 1/2" (0.0.465.39), which creates a stable and easy-to-open connection between two ends of a chain. It can be closed again using needle-nosed pliers.

Variants

Sort by

Chain 1/2″

Chain 1/2″

0.0.465.17
Delivery unit:  Cut-off
Chain 1/2″

Chain 1/2″

0.0.602.31
Delivery unit:  Roll

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23170403
eCl@ss 7.1
23170403
eCl@ss 11.0
23170403
eCl@ss 6.0.1
23170403
eCl@ss 4.0
23170402
eCl@ss 5.0
23170403
eCl@ss 5.1
23170403
UNSPSC 7.0
26111505
UNSPSC 9.0
26111505
eCl@ss 4.1
23170402
Customs tariff number
73151190