userMenu.login
cart.title

Synchronising Set

objectDetails.currentVariantLabel
Synchronising Set D55/D34 (0.0.666.60)
Synchronising Set D55/D34
0.0.666.60
objectDetails.showAllVariants
cad.iconLink.title

technicalData.sectionHeadline

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.

technicalData.scopeOfDeliveryHeadline

2 Coupling Halves D55/D25, Al
2 expanding hub coupling half D55/D34, St and Al
2 Coupling Inserts D55, PU, green
Tightening torque, expanding hub screw: 23 Nm
Tightening torque, clamping hub screw: 9.6 Nm

technicalData.propertiesHeadline

technicalData.articleNumber0.0.666.60
Lineline 8
ESD-safeNo
Weightm = 756 g
Delivery unit1 set

description.sectionHeadline

Synchronising Sets from item can be used to operate two Linear Units in parallel with just one motor. They comprise shaft couplings that are tailored to the relevant Linear Unit and designed to compensate for slight misalignments and withstand the stated torque over long-term use. These couplings are pre-prepared to accommodate a synchronising shaft. Besides featuring a compact design, expanding hub couplings are also easy to use. The friction-based connection is created by tightening the central screw with the specified tightening torque. An integrated pull-off thread makes them easy to dismantle. First, the central screw is removed, then a longer screw is driven into the same position to effortlessly relieve tension in the coupling.
Please note that the maximum length of the synchronising shaft varies depending on its operating speed.

variants.sectionHeadline

variants.mobile.label

Synchronising Set KLE 8 80x80

Synchronising Set KLE 8 80x80

0.0.609.78
Line:  8Compatibility:  KLECoupling:  D55
Synchronising Set KLE 6 60x60

Synchronising Set KLE 6 60x60

0.0.609.81
Line:  6Compatibility:  KLECoupling:  D40
Synchronising Set KRF 8 80 ZR

Synchronising Set KRF 8 80 ZR

0.0.648.58
Line:  8Compatibility:  KRFCoupling:  D50
Synchronising Set GSF 8 40 R10

Synchronising Set GSF 8 40 R10

0.0.662.95
Line:  8Compatibility:  GSF / KLECoupling:  D30
Synchronising Set D30/D12

Synchronising Set D30/D12

0.0.662.51
Line:  5Compatibility:  expanding hub coupling D12Coupling:  D30
Synchronising Set D40/D15

Synchronising Set D40/D15

0.0.662.50
Line:  8Compatibility:  expanding hub coupling D15Coupling:  D40
Synchronising Set D55/D34

Synchronising Set D55/D34

0.0.666.60
Line:  8Compatibility:  expanding hub coupling D34Coupling:  D55
Synchronising Set D80/D34

Synchronising Set D80/D34

0.0.666.61
Line:  8Compatibility:  expanding hub coupling D34Coupling:  D80

downloads.sectionHeadline

title

classifications.sectionHeadline

classifications.introduction
eCl@ss 8.0
23031101
eCl@ss 11.0
23031101
eCl@ss 6.0.1
23029090
eCl@ss 4.0
23030701
eCl@ss 4.1
23030701
eCl@ss 5.0
23020301
eCl@ss 5.1
23020301
eCl@ss 7.1
23020501
UNSPSC 9.0
31163001
UNSPSC 7.0
31163001
classifications.customTariffsNumber
84836080