Corner-Fastening Set Clamp-Profile 8 32x18

Corner-Fastening Set Clamp-Profile 8 32x18

0.0.494.73

Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

2 Button-Head Screws ISO 7380-M5x16, St, bright zinc-plated

Properties

Article number0.0.494.73
Lineline 8
ESD-safeNo
Weightm = 54.5 g
Delivery unit1 set
MaterialDie-cast zinc, white aluminium similar to RAL 9006
Tightening torque, bright zinc-platedMbz-p = 4.5 Nm

Description

Corner-Fastening Set Clamp-Profile 8 32x18 is used for stable profile connections.
The rigid screw fastening to the end faces of the profiles being connected produces a frame that is ideal for use within lightweight enclosures and for door frames.
Corner-Fastening Set Clamp-Profile 8 32x18 contains all components required for a profile connection. An M5 thread must be tapped into the core bore of each Clamp Profile 8 32x18.
The Corner-Fastening Sets are multifunctional. They can be used in a variety of ways when used with special add-on elements:
- Roller Set 32x18 can be fitted directly into the corner fastener. This turns the frame into a smooth-running sliding door element that can be employed e.g. in the Sliding-Door Guide Profile 8 40x10.
- Hinge Sets 32x18 come with an insert for the corner fastener which forms a door hinge in conjunction with a hinge bearing in the frame of the surrounding construction. This provides an easy means of constructing a stylish, lightweight swing door with a particularly low door gap and without needing to fit additional hinges.
The maximum permissible weight of a door is 10 kg.
Sliding-Door Guide Profile 8 40x10 is fitted with Clip 8 St at the top and bottom of the surrounding profile frame. It forms the guide for two door leaves of Clamp Profile 8 32x18.
Spring-loaded Roller Set 32x18 is fitted into the corner fasteners of the previously constructed clamp profile frames. A Roller Set must be installed in each fastener so as to guide the sliding door leaf.
A limit stop can be installed to prevent the roller insert from springing. The corner fasteners at the bottom of a sliding door frame are always installed with rigid rollers. Spring-loaded rollers in the corner fasteners at the top enable the door leaves to be fitted into a profile frame which has already been built.
If required, all four roller inserts may be blocked by limit stop inserts and the outer profile frame finished after the sliding door leaves have been fitted. This effectively prevents the doors from being removed without dismantling the frame.
After the rollers have been fitted, a plastic end cap closes the fastener at the side and serves as a door stop in the terminal positions.
The sliding doors can also be run directly in the grooves of a Line 5 profile. This produces a particularly compact frame construction.
Folding-Door Hinge Al for Clamp Profile 8 32x18 is used to link together separate segments to create space-saving folding doors. Thanks to the Hinges, the moving elements fold up in a concertina formation.
The hinge inserts are also fitted into the corner fasteners after the clamp profile frame has been closed.
A hinge bearing is attached to both the upper and the lower frame profile and functions as a rotary bearing for a door. During installation, the spring-loaded Hinge Pin engages in the bearing plate, whose position in the groove can be adjusted when the swing door is open. This provides an effective means of preventing a closed door from being dismantled.
The Hinge Sets for installing swing doors in frame constructions of Line 5 or 8 contain all the parts required for one hinge.

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
UNSPSC 9.0
30152001
eCl@ss 11.0
23360290
UNSPSC 7.0
30152001
eCl@ss 4.0
22041424
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
eCl@ss 7.1
23360290
Customs tariff number
83024200