Double Flat Belt Conveyor 8 40 D

Double Flat Belt Conveyor 8 40 D

* Mandatory information

Technical Data

Properties

Total width of conveyorBG = 172–2400 mm
Axle spacing onLA = 500–6000 mm
Drive arrangementOutput side left/right
Drive position0°; 90°; 180°; 270°
Lineline 8
LineFT
Width of conveyorBF = 40, 80 mm
Delivery unit1 pce.
Status on deliverynot preassembled
Max. total load (non-accumulating)55 kg
Max. total load (accumulating)17 kg
Max. line load25 kg/m
Nominal voltageUn = 230/400 V
TransportbandgeschwindigkeitV TB = 2.5–28.9 m/min
Conveyor belt widthBT = BF-5 mm

Description

Double Flat Belt Conveyor 8 40 D is available with two belt widths and in lengths of up to 6000 mm. The spacing between the belts can be selected as required. The synchronised belts help to move inherently stable products efficiently from A to B.
The stable load-bearing frame with four freely accessible Line 8 grooves makes it easier to attach accessories, connect stands and integrate machines. The gap between the two belts provides space for installing sensors and actuators below the conveyed loads.
Depending on the type of belt used, Double Flat Belt Conveyor 8 40 D can either have reduced static friction to enable accumulation or be designed for continuous conveying on an incline of up to 20°.