Insertion Guide / End Stop - Suspended Conveyor System

Insertion Guide / End Stop - Suspended Conveyor System

Show all 2 variants
On request

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 Insertion Guide 6 30x30 -80, PA-ESD, black similar to RAL 9005
1 Washer ISO 7089-5-200 HV, St, bright zinc-plated
1 Washer ISO 7092-6-200 HV, St, bright zinc-plated
1 Hexagon Socket Head Cap Screw DIN 912-M5x30, St, bright zinc-plated
1 Hexagon Socket Head Cap Screw DIN 7500-M6x20, self-tapping, St, bright zinc-plated
1 Automatic Fastener 6 sleeve with thread
1 spacer sleeve D8/D6.4-5, St, stainless
1 spacer sleeve D7/D5.4-10, St, stainless


Article number 0.0.716.11
Line Line D30
ESD-safe Yes
Weight m = 84 g
Delivery unit 1 set
Max. load-carrying capacity F = 100 N
Colour black similar to RAL 9005


Insertion Guide 6 30x30-80 ESD makes it easier to insert Carriage D37-32 ESD (0.0.715.67) into Conveyor Rail Profile 6 30x30-80 (0.0.712.90). The central ridge ensures that Carriages placed down onto it slide onto the inclined rail in the correct orientation and position.
The ESD-safe Insertion Guide is fastened to the end face of the Conveyor Rail Profile using the enclosed self-tapping screw and Automatic Fastener.
The Insertion Guide creates a protruding section that makes it easier to feed Carriages onto the conveyor line. Fastening Bracket 6 30 D30 (0.0.715.27) is used to fasten the Conveyor Rail Profile flush to a profile frame.

Assembly Instructions

Installation sequence for Insertion Guide 6 30x30-80 ESD:
1. Screw the sleeve of the Automatic Fastener into the Line 6 groove on the underside of the Conveyor Rail Profile.
2. Use the self-tapping Hexagon Socket Head Cap Screw to fasten the Insertion Guide to the core bore (ensure the correct washer is used).
3. Screw the Hexagon Socket Head Cap Screw, along with washer, into the sleeve of the Automatic Fastener.
Fastening Bracket 6 30 D30 T1 is fastened to a (Profile) Tube D30 and the groove that runs along the top of Conveyor Rail Profile 6 30x30-80.
Fastening Bracket 6 30 D30 (0.0.715.27), which is flatter, serves as the primary suspension point for the Conveyor Rail Profile and is fitted at the start and end points of the conveyor line.



Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
eCl@ss 7.1
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0.1
eCl@ss 11.0
Customs tariff number