Login
Cart
Lock System 6-8

Lock System 6-8

0.0.458.33

Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Lock housing, PA-GF, black
Lock case, PA-GF, black with nab, St
Lock housing rabbet, St, black
2 angle brackets, Al, anodized
2 door handles, PA, black
Spacer sleeve, PA, black
2 flange nuts M4, St, bright zinc-pl.
2 Countersunk Screws DIN 7991-M4x12, St, bright zinc-pl.
4 sleeves, St, bright zinc-plated
Notes on Use and Installation

Properties

Article number0.0.458.33
Lineline 6
Lineline 8
ESD-safeNo
Weightm = 1.36 kg
Delivery unit1 set

Description

Lock System 6-8 enables the use of commercially available mortise locks to DIN 18251 (pin dimension 65 mm) and profile cylinders of locking systems. It is suitable for locking swing and sliding doors from Profiles 6 or 8 and a combination of both Lines. The profile frame does not need to be machined for holding the Lock System.
The screws concealed when the door is locked prevent the Lock System from being dismantled by unauthorised persons.

Its versatile fastening options mean that Lock System 6-8 can be fitted to both right-opening and left-opening doors and to the inside and outside of doors. The lock can be chosen to suit the specific function.
Lock System 6-8 fitted to a sliding door.
Swing door with inner-mounted lock, stop provided by the lock housing rabbet.
The panel element may need to be drilled for fitting door handles and standard cylinder locks. The lock housing contains the preformed openings for the holes.
The distance to the edge of the door determines the position of the through holes in the panel element which are required for the door handle and profile cylinder.
The door gap does not depend on the profile line used.
Depending on the thickness of the panel element and frame profile used, it may be necessary to select a longer standard profile cylinder than the one in this catalogue (0.0.458.42).

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23240190
eCl@ss 6.0.1
23190110
eCl@ss 4.0
22041406
eCl@ss 4.1
22041406
eCl@ss 5.0
23190110
eCl@ss 5.1
23190110
eCl@ss 11.0
23240190
UNSPSC 7.0
46171503
UNSPSC 9.0
31162503
eCl@ss 7.1
23240190
Customs tariff number
83014090