Mitre-Fastening Set

Mitre-Fastening Set

Selected variant
Mitre-Fastening Set 8 (0.0.492.30)
Mitre-Fastening Set 8
0.0.492.30
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Clamping pin M8x28.5, St, bright zinc-plated
Sleeve with bore, St, bright zinc-plated
Grub screw M10, St, bright zinc-plated
T-Slot Nut V 8 St M8, bright zinc-plated
Cap, PA grey

Properties

Article number0.0.492.30
Lineline 8
ESD-safeYes
Weightm = 40 g
Delivery unit1 set

Description

Mitre-Fastening Sets are suitable for connecting two profiles at an angle. They are used primarily when constructing frame elements and panel edging. The profile grooves facing each other inside the frame remain unobstructed so they can be used for holding panel elements.
The position of the clamping pins at right angles to the cut profile edge generates particularly high clamping forces on the fastening elements. The clamping screws are accessed from the side of the profile frame.

Mitre-Fastening Sets 8 are available for two different forms of profile connection:
- Mitre-Fastening Set 8
A mitred Profile 8 (at any angle γ between 30° and 90°) is screwed to the side of a Profile 8.
- Mitre-Butt-Fastening Set 8
Two mitred profiles (each with an identical angle γ between 30° and 90°) are connected together. This gives a possible angle between the profiles of (2γ) between 60° and 180°.
Your item dealer can provide the required mitre cuts and profile processing as a service.
Note: Despite the optimized design, the flow of forces across the inclined contact faces of the profiles is such that only part of the pretension of the screw connection is utilized. Mitre connections therefore have a lower load bearing capacity than other, right-angled profile connections (Standard-Fastening,
Universal-Fastening or Automatic-Fastening Set).
Mitre-Fastening Sets should therefore not be used for constructing basic frames and safety-related parts that are subject to high loads.

Variants

Sort by

Gehrungs-Verbindungssatz 8

Gehrungs-Verbindungssatz 8

0.0.492.30
Baureihe:  8Verbindungsart:  Variabel
Gehrungs-Verbindungssatz 6

Gehrungs-Verbindungssatz 6

0.0.627.12
Baureihe:  6Verbindungsart:  Variabel
Gehrungs-Stoß-Verbindungssatz 8

Gehrungs-Stoß-Verbindungssatz 8

0.0.492.25
Baureihe:  8Verbindungsart:  Variabel stoßend
Gehrungs-Stoß-Verbindungssatz 6

Gehrungs-Stoß-Verbindungssatz 6

0.0.606.47
Baureihe:  6Verbindungsart:  Variabel stoßend

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
UNSPSC 9.0
31162503
eCl@ss 4.0
22041424
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
73269098