item
Wall Trunking, Profile X 8 70x20

Wall Trunking, Profile X 8 70x20

Selected variant
Wall Trunking, Profile X 8 70x20 K76, natural (0.0.722.30)
Wall Trunking, Profile X 8 70x20 K76, natural
0.0.722.30
Show all
20 6,000
On request
* Mandatory information
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number 0.0.722.30
Line line X
Line line 8
ESD-safe Yes
Weight m = 667 g/m
Delivery unit cut-off max. 6000 mm
Material Al, anodized
Colour natural

Description

Together, two Wall Trunking Profiles form the outer part of the cable conduit. Cables can be run between the profiles and inside the wall. This means it is also possible to install wall trunking on both sides of a wall structure.
When installed in a one-sided configuration, Fixing System, Cover Profile 8 120 is used as a cover panel at the rear. The opening between Wall Trunking Profiles at the front is sealed using Cover Profile 76 Al (0.0.663.40).
Wall Trunking Profiles are available with a rectangular outer contour or a 45° angled outer edge. The angled variant is used for horizontal wall trunking in a cleanroom. The rectangular variant is ideal for vertically installed conduits.
Wall Trunking, Profile X 8 70x20 K76 is used as a cover in the item wall trunking system. The aluminium profile and its rectangular outer edge is ideal for constructing a vertically installed cable conduit.
Sockets, switches and network connections can all be clipped directly into place between two Wall Trunking Profiles. Cover Profile 76 Al (0.0.663.40) serves as a cover panel for the front.
The modular wall trunking solution from item is integrated into the wall and is ideal for use in both rooms and machine cabins. The wall trunking is also suitable for use in cleanrooms. It only protrudes by 20 mm. The 45° angle on the surface of the Wall Trunking Profile ensures dust will not settle on the trunking and prevents any disruption to low-turbulence air currents.
The wall trunking also allows for cables to be laid over vertical profiles without any need for machining. The trunking is prepared for use with K76 elements. Sockets, switches and network connections can all be clipped into place conveniently between two sections of Wall Trunking Profile, maximising the flexibility of the system.
The item wall trunking is a modular system solution based on the item Fixing System. The aluminium Wall Trunking Profiles are fastened in place using Fixing System, Base Profile X 8 and can be combined as required. Metal Caps provide a flush closure.
Thanks to ready-made corner elements, you can lay cables to any point in a room. You can even switch from vertical to horizontal sections and back.

Assembly Instructions

Variants

Sort by

Wall Trunking, Profile X 8 70x20 K76, natural

Wall Trunking, Profile X 8 70x20 K76, natural

0.0.722.30
Delivery unit:  Cut-off Length:  20 ... 6000 Outside edge:  Corner
Wall Trunking, Profile X 8 70x20 K76, natural

Wall Trunking, Profile X 8 70x20 K76, natural

0.0.722.31
Delivery unit:  Piece Length:  6000 Outside edge:  Corner
Wall Trunking, Profile X 8 70x20-45° K76, natural

Wall Trunking, Profile X 8 70x20-45° K76, natural

0.0.722.28
Delivery unit:  Cut-off Length:  20 ... 6000 Outside edge:  Chamfer
Wall Trunking, Profile X 8 70x20-45° K76, natural

Wall Trunking, Profile X 8 70x20-45° K76, natural

0.0.722.29
Delivery unit:  Piece Length:  6000 Outside edge:  Chamfer

Downloads

CAD Data

Accessoires

Wall Trunking, Profile X 8 70x20-45° K76, natural
Wall Trunking, Profile X 8 70x20-45° K76, natural
0.0.722.28
Wall Trunking, Cap 200x20 2x45°
Wall Trunking, Cap 200x20 2x45°
0.0.723.95
Wall Trunking, Cap 200x20
Wall Trunking, Cap 200x20
0.0.724.01
Wall Trunking, Bracket Set 8 120
Wall Trunking, Bracket Set 8 120
0.0.726.76
Fixing System, Cover Profile 8 120, natural
Fixing System, Cover Profile 8 120, natural
0.0.721.27
Cover Profile 76 Al, natural
Cover Profile 76 Al, natural
0.0.663.41
Mounting Box K76 M45 1 Gang, grey
Mounting Box K76 M45 1 Gang, grey
0.0.663.52
Mounting Box K76 M45 2 Gang, grey
Mounting Box K76 M45 2 Gang, grey
0.0.663.53
Socket 33° M45 1 Gang, black grey, similar to RAL 7021
Socket 33° M45 1 Gang, black grey, similar to RAL 7021
0.0.663.57
Locking Clip St, bright zinc-plated
Locking Clip St, bright zinc-plated
0.0.663.42
Socket 33° M45 2 Gang, black grey, similar to RAL 7021
Socket 33° M45 2 Gang, black grey, similar to RAL 7021
0.0.663.61
Socket 33° M45 3 Gang, black grey, similar to RAL 7021
Socket 33° M45 3 Gang, black grey, similar to RAL 7021
0.0.663.65
Face Plate M45 2 Gang with Labelling Panel, black grey, similar to RAL 7021
Face Plate M45 2 Gang with Labelling Panel, black grey, similar to RAL 7021
0.0.663.72
ON/OFF Switch, 1-Pole M45 10A/250V, black grey, similar to RAL 7021
ON/OFF Switch, 1-Pole M45 10A/250V, black grey, similar to RAL 7021
0.0.689.32
CEE Socket K76 16A/400V
CEE Socket K76 16A/400V
0.0.702.17
Earth Connection, Installation Column Profile, bright zinc-plated
Earth Connection, Installation Column Profile, bright zinc-plated
0.0.663.49
Cable Entry Protector K76 with Sealing Brush, black
Cable Entry Protector K76 with Sealing Brush, black
0.0.663.87
Adapter M45 for Control Circuit Device, 22mm, black grey, similar to RAL 7021
Adapter M45 for Control Circuit Device, 22mm, black grey, similar to RAL 7021
0.0.687.74
Adapter M45 for Control Circuit Device, 22mm, yellow similar to RAL 1021
Adapter M45 for Control Circuit Device, 22mm, yellow similar to RAL 1021
0.0.691.58
Pushbutton, 22mm, red
Pushbutton, 22mm, red
0.0.691.48
Emergency Stop Button, Turn-Release, 22mm
Emergency Stop Button, Turn-Release, 22mm
0.0.691.53
Selector Switch 60°, 22mm
Selector Switch 60°, 22mm
0.0.691.54
Contact Block, 1NO, 22mm
Contact Block, 1NO, 22mm
0.0.691.57
Contact Block, 1NC, 22mm
Contact Block, 1NC, 22mm
0.0.691.56
Wall Trunking, Inside Corner Set X 8 70x20-45° K76
Wall Trunking, Inside Corner Set X 8 70x20-45° K76
0.0.724.10
Universal Holder 8, black
Universal Holder 8, black
0.0.494.52

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
27400704
eCl@ss 11.0
27400704
eCl@ss 6.0.1
27400704
eCl@ss 4.0
27140603
eCl@ss 4.1
27140603
eCl@ss 5.0
27140603
eCl@ss 5.1
27140603
eCl@ss 7.1
27400704
UNSPSC 9.0
30102306
UNSPSC 7.0
30102306
Customs tariff number
76042100