Perfil portante
Datos técnicos
Características
| Número de artículo | 0.0.453.52 |
|---|---|
| Protección contra ESD | si |
| Sección transversal | A = 2,73 cm2 |
| Peso | m = 0,74 kg/m |
| Unidad de suministro | 1 pza. long. 3000 mm |
| Material | Al, anodizado |
| Color | natural |
Descripción
Guides the counterweight and secures it to the chain. The plastic slide elements are inserted with positive locking in a Conduit Profile secured to the rear of the Lifting-Door Guide Profile.
Lifting-Door Counterweight
Provides the counterweight for the lifting door. You should always use two counterweights that correspond to the weight of the door. The length l of such a counterweight can be roughly calculated as follows:
l [mm] = m x 26 [mm/kg] - 11 [mm]
Mass m [kg]: Weight of the lifting door
Support Profile 80
Is screwed to the rear of the Lifting-Door Guide Profile. The counterweight runs inside this profile and a Conduit Profile 80x80 SE locks into position on top of the Support Profile to cover the counterweight.
Chain ½″
For connectingthe lifting door and counterweight. A lifting door must be suspended on two chains that are run via Chain Reverse Units.
A special design for ensuring precise movement of lifting door and counterweight.
The motor can drive the lifting door at any Chain Reverse Unit.
Where motors are fitted with brakes, a counterweight is not needed.
En el perfil canal soporte, deben taladrarse agujeros de ⌀ 3,5 mm en la línea de referencia.
La unión atornillada conecta eléctricamente las canales.
Variantes
Ordenar por
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 40 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 40 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 40 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 40 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 80 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 80 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 80 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 80 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 80 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 80 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 120 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 120 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 120 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 120 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 160 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 160 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 160 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 160 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 160 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 160 mm |
descargas
Datos CAD
Archivos
Clasificación
Las clasificaciones son estándares de datos de productos de toda la industria que se utilizan, entre otras cosas, para soportar el procesamiento estructurado en los sistemas ERP y de negocio electrónico. ¿Necesita los datos de clasificación de todos los productos de item para su sistema de adquisición electrónica? Si es así, no dude en contactarnos.
eCl@ss 8.0
27400704
eCl@ss 11.0
27400704
eCl@ss 4.0
27140603
eCl@ss 5.0
27140603
eCl@ss 5.1
27140603
eCl@ss 6.0.1
27400704
eCl@ss 4.1
27140603
eCl@ss 7.1
27400704
UNSPSC 9.0
30102306
UNSPSC 7.0
30102306
Código arancelario
76042990