Profil nośny
Dane techniczne
Właściwości
| Numer artykułu | 0.0.453.52 |
|---|---|
| Odporność na ESD | Tak |
| powierzchnia | A = 2,73 cm2 |
| waga | m = 0,74 kg/m |
| JOP | 1 szt. à 3 000 mm |
| materiał | Al, anodowany |
| Kolor | kolor naturalny |
Opis
Guides the counterweight and secures it to the chain. The plastic slide elements are inserted with positive locking in a Conduit Profile secured to the rear of the Lifting-Door Guide Profile.
Lifting-Door Counterweight
Provides the counterweight for the lifting door. You should always use two counterweights that correspond to the weight of the door. The length l of such a counterweight can be roughly calculated as follows:
l [mm] = m x 26 [mm/kg] - 11 [mm]
Mass m [kg]: Weight of the lifting door
Support Profile 80
Is screwed to the rear of the Lifting-Door Guide Profile. The counterweight runs inside this profile and a Conduit Profile 80x80 SE locks into position on top of the Support Profile to cover the counterweight.
Chain ½″
For connectingthe lifting door and counterweight. A lifting door must be suspended on two chains that are run via Chain Reverse Units.
A special design for ensuring precise movement of lifting door and counterweight.
The motor can drive the lifting door at any Chain Reverse Unit.
Where motors are fitted with brakes, a counterweight is not needed.
Wymagane jest wykonanie otworów o ⌀ 3,5 mm w profilach nośnych w miejscu wskazanym poprzez nacięcie wzdłużne.
Mocowanie śrubowe powoduje powstanie elektrycznie przewodzącego połączenia elementów kanałowych.
Warianty
Sortuj wg
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 40 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 40 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 40 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 40 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 80 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 80 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 80 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 80 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 80 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 80 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 120 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 120 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 120 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 120 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 160 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 160 mm | |
| Line: 8 | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: 8 mm | Width: 160 mm | |
| Line: 8 | Delivery unit: Piece | Length: 3000 | Groove type: 8 mm | Width: 160 mm | |
| Line: None | Delivery unit: Cut-off | Length: 20 ... 3000 | Groove type: - | Width: 160 mm | |
| Line: None | Delivery unit: Piece | Length: 3000 | Groove type: - | Width: 160 mm |
do pobrania
Dane CAD
Klasyfikacje
Klasyfikacje to branżowe standardy danych produktowych, które są wykorzystywane m. in. do wspierania ustrukturyzowanego przetwarzania w systemach ERP i e-biznesu. Potrzebujesz danych klasyfikacyjnych dla wszystkich produktów dla swojego systemu e-zamówień? Jeśli tak, nie wahaj się z nami skontaktować.
eCl@ss 8.0
27400704
eCl@ss 11.0
27400704
eCl@ss 4.0
27140603
eCl@ss 5.0
27140603
eCl@ss 5.1
27140603
eCl@ss 6.0.1
27400704
eCl@ss 4.1
27140603
eCl@ss 7.1
27400704
UNSPSC 9.0
30102306
UNSPSC 7.0
30102306
Kod taryfy celnej
76042990