Login
Cart

Linear Unit KGT 6 60 P20

0.0.706.00

This item is not directly orderable.
configure now
* Mandatory information
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.

Properties

Article number0.0.706.00
Lineline 6
ESD-safeNo
Moment of Inertia, torsionalIt = 1,23 cm4
Moment of Inertia, x-axisIx = 28,09 cm4
Moment of Inertia, y-axisIy = 43,46 cm4
Total massm = m1 + H * m2
Maximum operating loadFx max = 1.000 N
Maximum force in direction yFy max = 2.000 N
Maximum force in direction zFz max = 2.000 N
Weightm = 3,253 kg
Weightm = 4,67 kg/m
Weight per length of the drive medium (timing belt, chain)mlz = 0 kg/m
Efficiency. = 0,9
Max. speedup to 1 m/s
Delivery unit1 pce.
Basic mass (when stroke length = 0 mm)m1 = 3,253 kg
Mass per mm of strokem2 = 4,24 g/mm
Max. accelerationamax  = 15 m/s2
Max. speedVmax = 1 m/s
Repeat accuracy. = 0.01 mm
Mass moment of inertia when stroke length = 0 mmJ0 = 30,21 kg mm2
Mass moment of inertia per kg of payloadJN = 10,1 kg mm2/kg
Mass moment of inertia per m of strokeJH = 43,1 kg mm2/m
Stroke max.Hmax = 2.600 mm
max. drive torque. = 3,7 Nm
Maximum moment around the x axisMx max = 15 Nm
Maximum moment around the y axisMy max = 120 Nm
Maximum moment around the z axisMz max = 120 Nm
Frictional moment. = 0,2 Nm
Safety clearancesmin = 26 mm
Support width when Fy max..  = 850 mm
Support width when Fz max..  = 650 mm
Strokeh = 20 mm/r
Resistance Moment, x-axisWx = 8,19 cm3
Resistance Moment, y-axisWy = 14,44 cm3

Description

The distances S1 and S2 are built as follows:
S1: distance to the fixed bearing (13mm) + safety distance (Smin = 26mm) + n x spindle support (16mm)
S2: distance to floating bearing (11mm) + safety distance (Smin = 26mm) + n x spindle support (16mm)The safety distance of 26mm is in all variants the free area, in which e.g. during the reference motion procedure is driven.
Compact, precise and dynamic! Linear Unit KGT 6 60 P20 combines a ball screw drive that has a stroke of up to 2600 mm with a strong carriage, and does so in the smallest of installation spaces.
In applications with a long travel distance, travelling spindle supports keep everything running smoothly and precisely without sacrificing dynamics. Radial stabilisers on the inside of the axis provide perfect support for the specially shaped spindle regardless of the stroke length and carriage position.
Thanks to its installation dimensions of just 60x60 mm and two Line 6 groves on its side flanks, Linear Unit KGT 6 60 is very easy to integrate into constructions. Featuring a spindle lead of 20 mm per revolution, the system can reach a speed of up to 1 m/s, even at maximum stroke. Acceleration is up to 15 m/s2.
The carriage runs on two recirculating ball units that exhibit minimal reversal play during a change of direction. This enables reliable positioning with a repeatability of 0.01 mm at a high feed force of up to 1000 N. The powerful ball screw unit is thus ideal as a single axis for moving tools and workpieces with absolute precision. When combined with additional KGT 6 60 units and other item Linear Units, the spindle axis can be used to build precise and strong 2D and 3D gantries.
An unbroken cover strip conceals the inner workings and therefore provides protection from soiling. The spindle is low-maintenance and features lifetime lubrication.
These plug-and-play solutions can be connected to item Motors in 40 mm and 60 mm sizes without the need for additional machining. Drive Set KGT 6 60 universal is available for use with other drives.
The whole selection and design process can be completed in next to no time when using item MotionDesigner®. The software maps out the entire system to suit your transport task. The Linear Unit is supplied as a ready-to-install solution in a custom length.
Ein durchgängiges Abdeckblech verdeckt den Innenraum und schützt so vor Verschmutzung. Die Spindel ist wartungsarm und mit einer Lebensdauerschmierung versehen.
Die Taillierung der Spindel sorgt für Laufruhe auch bei hohen Drehzahlen.
Die Plug-and-Play Antriebssätze KGT 6 60 SE 40 bzw. SE 60 ermöglichen den Anschluss von item Motoren der Baugröße 40 mm und 60 mm ohne zusätzliche maschinelle Bearbeitung.
Zum Anschluß anderer Motoren mit der Baugröße 60 x 60 mm steht der Antriebssatz KGT 6 60 universal zur Verfügung.
――――――  with support
--------------  without support
D = Speed  [1/min]
 L = Length of shaft [mm]
 
Maximum spindle speed with and without KGT 6 60 P 20 spindle supports
The spindle supports keep the maximum unsupported spindle length more or less constant. This means the critical speed of 3000 min-1 is constant over the entire possible stroke range.

Load Calculation

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23301702
eCl@ss 7.1
23301702
eCl@ss 11.0
23301702
eCl@ss 5.0
23329090
eCl@ss 5.1
23329090
eCl@ss 6.0.1
23301702
UNSPSC 7.0
26111506
UNSPSC 9.0
26111506
eCl@ss 4.0
36400806
eCl@ss 4.1
36400701
Customs tariff number
84879090