Technical Data
Scope of Delivery
Clamping pin M5x23, St, bright zinc-plated
Sleeve with bore, St, bright zinc-plated
Grub screw M6, St, bright zinc-plated
T-Slot Nut 6 St M5, bright zinc-plated
| Line | line 6 |
|---|---|
| ESD | ESD-safe = Yes |
| Weight | m = 17 g |
| Delivery unit | 1 set |
Description
2. Drill a counterbore (⌀ 9.1 mm, depth 21 mm – Drill 0.0.628.25) for the fastener sleeve into the side of the mitre-cut profile (use of drilling jig 0.0.616.77 recommended).
3. Drill a hole (⌀ 5.5 mm – Drill 0.0.628.55) into the mitred face of the profile (use of drilling jig 0.0.616.89 recommended). Minimum hole depth: 15 mm.
4. Insert the T-Slot Nut into the profile groove of the continuous profile and screw in the clamping pin until the mark around the perimeter is level with the profile surface.
5. Insert the fastener sleeve into the counterbore of the mitred profile and fit the assembly over the clamping pin.
6. Drive grub screw M6 into the fastener sleeve and clamp the profile connection (M = 3.5 Nm).
Variants
| Line | Material | ESD-safe | Connection type | |
|---|---|---|---|---|
 Mitre-Fastening Set 8 0.0.492.30 |
Line: 8 | Material: Steel (bright zinc-plated) | ESD-safe: ✓ | Connection type: Variable |
 Mitre-Fastening Set 6 0.0.627.12 |
Line: 6 | Material: Steel (bright zinc-plated) | ESD-safe: ✓ | Connection type: Variable |
 Mitre-Butt-Fastening Set 8 0.0.492.25 |
Line: 8 | Material: Steel (bright zinc-plated) | ESD-safe: ✓ | Connection type: Variable, butting |
 Mitre-Butt-Fastening Set 6 0.0.606.47 |
Line: 6 | Material: Steel (bright zinc-plated) | ESD-safe: ✓ | Connection type: Variable, butting |
