item
Linear Unit KLE

Linear Unit KLE

Selected variant
Linear Unit KLE 5 40x40 LR (0.0.710.86)
Linear Unit KLE 5 40x40 LR
0.0.710.86
Show all
1 2.800
On request
configure now
* Mandatory information
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Properties

Article number 0.0.710.86
Line line 5
ESD-safe No
Moment of Inertia, x-axis Ix = 7,3 cm4
Moment of Inertia, y-axis Iy = 11,01 cm4
Maximum operating load Fx max = 150 N
Maximum force in direction y Fy max = 250 N
Maximum force in direction z Fz max = 200 N
Weight m = 1,289 kg
Weight m = 1,999 kg/m
Weight per length of the drive medium (timing belt, chain) mlz = 0,064 kg/m
Efficiency . = 1
Delivery unit 1 set
Max. speed Vmax = 5 m/s
Repeat accuracy . = 0.1 mm
Stroke max. Hmax = 2.800 mm
max. drive torque . = 2,2 Nm
Maximum moment around the x axis Mx max = 4 Nm
Maximum moment around the y axis My max = 8 Nm
Maximum moment around the z axis Mz max = 15 Nm
Stroke h = 90 mm/r

Description

The roller elements of compact Linear Unit KLE 5 40x40 LR run inside the profile and are concealed by the timing belt. The linear axis is supplier ready to install and with the timing-belt reverse units already fitted.
The tension of the timing belt and the play on the carriage are easy to adjust. Timing Belt AT3 keeps everything running smoothly.
Drive Set KLE 5 40x40 makes the connection to a motor and gearbox. The timing-belt drive can also be used to run two Linear Units KLE 5 40x40 LR in parallel with the aid of a Tube D16x1.5 St (0.0.664.14) as a synchroniser shaft. 
This shaft can be safely covered with Synchroniser Shaft Cover Set KLE 5 40x40 (0.0.717.72), Conduit Profile U 40x40 E and its matching Lid Profile.

Assembly Instructions

The tension of the timing belt is set via two screws on the reverse unit of Linear Unit KLE 5 40x40 LR. They are spring mounted and alter the position of the reversing pulley. The tension of the timing belt is at its optimum when the screw heads are flush with the surface of the unit’s casing.
Despite the compact dimensions, adjusting the play on the four D6 roller elements is very easy. Two eccentric bolts are pre-tensioned with springs. The three stop screws are loosened when the carriage is fitted, which ensures the roller elements move into the ideal, play-free position on the two shafts in the profile.

Variants

Sort by

Lineární jednotka KLE 5 40 x 40, L

Lineární jednotka KLE 5 40 x 40, L

0.0.710.86
Řada:  5 Délka zdvihu:  1 ... 2800 Typ vodítka:  Hřídel D6 Šířka ozubeného řemene:  16 mm
Lineární jednotka KLE 6 60 x 60, L

Lineární jednotka KLE 6 60 x 60, L

0.0.605.07
Řada:  6 Délka zdvihu:  1 ... 5750 Typ vodítka:  Hřídel D10 Šířka ozubeného řemene:  25 mm
Lineární jednotka KLE 8 80x80 LR

Lineární jednotka KLE 8 80x80 LR

0.0.605.02
Řada:  8 Délka zdvihu:  1 ... 5600 Typ vodítka:  Hřídel D14 Šířka ozubeného řemene:  34 mm

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23301702
eCl@ss 11.0
23301702
eCl@ss 7.1
23301702
eCl@ss 5.0
23329090
eCl@ss 5.1
23329090
eCl@ss 6.0.1
23301702
eCl@ss 4.0
36400806
eCl@ss 4.1
36400701
UNSPSC 7.0
26111506
UNSPSC 9.0
26111506
Customs tariff number
84879090