item
Sliding Door 8 32x18, Fixing Plate

Sliding Door 8 32x18, Fixing Plate

0.0.717.57

On request
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

1 fixing plate, St, bright zinc-plated
1 locating lug, die-cast zinc
1 T-Slot Nut V 8 St M8, bright zinc-plated
1 dome-head screw M8x14, St, bright zinc-plated

Properties

Article number 0.0.717.57
Torque M = 8 Nm
Line line 8
ESD-safe No
Weight m = 43.3 g
Delivery unit 1 set

Description

Slender Clamp Profiles 8 32x18 create space-saving sliding doors. Four door segments that close in the middle make it easier to gain access through the centre of the opening. Half the overall width of the frame is opened up. 
Sliding-Door Guide Profile 8 40x10 (0.0.495.13) allows you to move two door segments in parallel along one Line 8 groove. Roller for Corner-Fastening Set 8 32x18 (0.0.494.74) keeps everything running smoothly. 
Sliding Door 8 32x18, Fixing Plate is used to hold the door segments of a sliding door made using Clamp Profiles 8 32x18 in one place. The device prevents the inadvertent movement of door segments.
When combined with Clamp Lever Pi 60 M8x16 (0.0.684.70), the sliding-door fixing plate can be tightened and then loosened again in next to no time. A DIN 125-8.4 mm washer should also be used.

Assembly Instructions

Sliding-Door Guide Profile 8 40x10 (0.0.495.13) needs to be machined in order to install Sliding Door 8 32x18, Fixing Plate.

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23240190
eCl@ss 4.0
22041415
eCl@ss 4.1
22041415
UNSPSC 9.0
31162703
eCl@ss 5.0
23210192
eCl@ss 5.1
23210192
eCl@ss 6.0.1
23210192
UNSPSC 7.0
31162703
eCl@ss 11.0
23240190
eCl@ss 7.1
23240190
Customs tariff number
73269098