Login
Cart

Chain Reverse Unit 8

Selected variant
Chain Reverse Unit 8 80 VK14 (0.0.463.37)
Chain Reverse Unit 8 80 VK14
0.0.463.37
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Chain Reverse Unit, die-cast zinc, black, pre-assembled
Ball-bearing sprocket wheel, z = 16 (z = number of teeth)
One revolution corresponds to 203.2 mm
effective radius rw = 32.3 mm
Hub with multi-spline DIN ISO 14-6x11x14
Hub depth 30 mm, Max. load: MD = 20 Nm
Tensioning Block, die-cast zinc, black, pre-assembled
Fastening screws, St, black, 2 caps, PA, black
Chain length in Reverse Unit 236.3 mm
Notes on Use and Installation

Properties

Article number0.0.463.37
Lineline 8
Torque max.Mmax. = 20 Nm
ESD-safeNo
Weightm = 1.1 kg
Delivery unit1 pce.
Status on deliveryPreassembled

Description

Chain Reverse Units 8 80 are used for reversing, clamping and driving Chain ½".
They are screwed into the end faces of Profiles 8 at a height of 80 mm.
It is possible to fit motors and couplings D55 directly to the Chain Reverse Unit.
The Chain Reverse Unit incorporates integrated chain tensioning block and clamp.
The Chain tensioning distance is 2x13 mm in total. The Chain tension must be set so that the Chain can also be operated with the slack side of the Chain only slightly pre-tensioned.
The Chain Reverse Units are screw-connected into the core bores in the end faces of the frame profiles.
The Chain Guide Profile must be cut 50 mm longer than the aluminium profile, since it must project 25 mm into the Reverse Unit at each end.
The Chain can be driven directly using the Chain Reverse Units or the Chain Counter-Reverse Unit. The sprocket wheels of the Chain Reverse Units are available with multi-spline hub VK14 or with a bore that can be machined as required. Use of multi-spline hub VK14 enables the modular accessories (Synchroniser Shafts) to be used without any restrictions.

Variants

Sort by

Chain Reverse Unit 8 80 with Bore D15

Chain Reverse Unit 8 80 with Bore D15

0.0.664.53
Drive type:  expanding hub coupling D15
Chain Reverse Unit 8 80 VK14

Chain Reverse Unit 8 80 VK14

0.0.463.37
Drive type:  spline shaft VK14
Chain Reverse Unit 8 80 with Bore

Chain Reverse Unit 8 80 with Bore

0.0.463.75
Drive type:  Hole ø 8, reborable

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23179105
eCl@ss 4.0
23170705
eCl@ss 4.1
23170705
eCl@ss 5.0
23179105
eCl@ss 5.1
23179105
eCl@ss 6.0.1
23179105
eCl@ss 7.1
23179105
eCl@ss 11.0
23170490
UNSPSC 9.0
26111504
UNSPSC 7.0
26111504
Customs tariff number
84833080