userMenu.login
cart.title

Direct-Fastening Set

objectDetails.currentVariantLabel
Direct-Fastening Set 8, bright zinc-plated (0.0.388.63)
Direct-Fastening Set 8, bright zinc-plated
0.0.388.63
objectDetails.showAllVariants
cad.iconLink.title

technicalData.sectionHeadline

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

technicalData.scopeOfDeliveryHeadline

Fastener, cast steel
Countersunk Screw DIN 7991-M6x20, St
Hexagon Socket Head Cap Screw DIN 7984-M6x14, St
Spacer sleeve, POM, black
T-Slot Nut 8 St M6

technicalData.propertiesHeadline

technicalData.articleNumber0.0.388.63
Lineline 8
Propertybright zinc-plated
ESD-safeYes
Weightm = 37 g
Delivery unit1 set
Tightening torque, bright zinc-platedMbz-p = 5,5 Nm

description.sectionHeadline

Power-lock connection (without machining) of two Profiles 8 that touch along their outer faces. The profiles can also run in parallel over a certain distance.
Both profiles can be moved in the direction of the groove.
The Direct-Fastening Set is particularly suitable for connecting the profiles of ball-bush block guides with other profiles, so that the profiles can be moved and no machining is required.
Note: Where anodized surfaces are to be fitted together, we recommend greasing the contact points. This minimises the level of noise generated.

description.assemblyHeadline

Installation note:
Loosen the Cap Screw to maximise the adjustment range of the wedge and gently tighten the Countersunk Screw.
Push the profiles together and tension the Direct-Fastening Set by tightening the Cap Screw.

variants.sectionHeadline

variants.mobile.label

Direct-Fastening Set 8, bright zinc-plated

Direct-Fastening Set 8, bright zinc-plated

0.0.388.63
Material:  Steel (bright zinc-plated)Connection type:  ParallelThread:  M6Thread length:  16.7
Direct-Fastening Set 8, stainless

Direct-Fastening Set 8, stainless

0.0.440.65
Material:  Stainless steelConnection type:  ParallelThread:  M6Thread length:  16.7
Direct-Fastening Set 8 90°, stainless

Direct-Fastening Set 8 90°, stainless

0.0.388.67
Material:  Stainless steelConnection type:  Right angledThread:  M8Thread length:  18

downloads.sectionHeadline

title

accessoires.sectionHeadline

L-Key 4 A/F
L-Key 4 A/F
0.0.440.74

classifications.sectionHeadline

classifications.introduction
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
UNSPSC 9.0
31162503
eCl@ss 4.0
22041424
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
classifications.customTariffsNumber
83024200