Login
Cart

Timing-Belt Reverse Unit

Selected variant
Timing-Belt Reverse Unit 5 40 R10 with Bore (0.0.410.06)
Timing-Belt Reverse Unit 5 40 R10 with Bore
0.0.410.06
Show all
Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Timing-Belt Reverse Unit, die-cast aluminium, black
Ball-bearing timing pulley with bore ⌀ 8H7, reborable up to max. ⌀ 15 mm
Hub depth 18 mm
2 Universal-Fastening Sets 5, die-cast zinc, bright zinc-pl.
Notes on Use and Installation

Technical note

One revolution corresponds to 140 mm, effective radius rw = 22.3 mm,
Frictional moment with 1‰ pre-tensioning of the Timing Belt: MR = 0.05 Nm
Max. load: MD = 3.3 Nm
Timing Belt length in the Timing-Belt Reverse Unit for
90° reversal: 110 mm
180° reversal (outer dimension 80): 135 mm
180° reversal (outer dimension 64): 150 mm
Pitch p = 5 mm    Number of teeth z = 28

Properties

Article number0.0.410.06
Lineline 5
Torque max.Mmax. = 4 Nm
ESD-safeNo
Weightm = 277 g
Delivery unit1 set

Description

To protect the Timing Belt against damage, the profiles must be rounded at the joint to the Timing-Belt Reverse Unit.
Mounting at a height of 40 mm in the groove of Profile 5 with Universal-Fastening Set 5.

Variants

Sort by

Timing-Belt Reverse Unit 5 40 R10 VK14

Timing-Belt Reverse Unit 5 40 R10 VK14

0.0.410.01
Line:  5Diameter of timing pulley:  40 mmTiming Belt width:  10 mmDrive type:  spline shaft VK14
Timing-Belt Reverse Unit 5 40 R10 with Bore

Timing-Belt Reverse Unit 5 40 R10 with Bore

0.0.410.06
Line:  5Diameter of timing pulley:  40 mmTiming Belt width:  10 mmDrive type:  Hole ø 8H7, reborable
Timing-Belt Reverse Unit 5 40 R10 with Bore D12

Timing-Belt Reverse Unit 5 40 R10 with Bore D12

0.0.662.73
Line:  5Diameter of timing pulley:  40 mmTiming Belt width:  10 mmDrive type:  expanding hub coupling D12
Timing-Belt Reverse Unit 8 40 R25 VK14

Timing-Belt Reverse Unit 8 40 R25 VK14

0.0.337.26
Line:  8Diameter of timing pulley:  40 mmTiming Belt width:  25 mmDrive type:  spline shaft VK14
Timing-Belt Reverse Unit 8 40 R25 with Bore

Timing-Belt Reverse Unit 8 40 R25 with Bore

0.0.337.34
Line:  8Diameter of timing pulley:  40 mmTiming Belt width:  25 mmDrive type:  Hole ø 8H7, reborable
Timing-Belt Reverse Unit 8 40 R25 with Bore D15

Timing-Belt Reverse Unit 8 40 R25 with Bore D15

0.0.662.52
Line:  8Diameter of timing pulley:  40 mmTiming Belt width:  25 mmDrive type:  expanding hub coupling D15
Timing-Belt Reverse Unit 8 80 R25 VK14

Timing-Belt Reverse Unit 8 80 R25 VK14

0.0.366.02
Line:  8Diameter of timing pulley:  80 mmTiming Belt width:  25 mmDrive type:  spline shaft VK14
Timing-Belt Reverse Unit 8 80 R25 VK32

Timing-Belt Reverse Unit 8 80 R25 VK32

0.0.366.11
Line:  8Diameter of timing pulley:  80 mmTiming Belt width:  25 mmDrive type:  spline shaft VK32
Timing-Belt Reverse Unit 8 80 R25 with Bore

Timing-Belt Reverse Unit 8 80 R25 with Bore

0.0.366.07
Line:  8Diameter of timing pulley:  80 mmTiming Belt width:  25 mmDrive type:  Hole ø 11H7, reborable
Timing-Belt Reverse Unit 8 80 R25 with Bore D34

Timing-Belt Reverse Unit 8 80 R25 with Bore D34

0.0.662.88
Line:  8Diameter of timing pulley:  80 mmTiming Belt width:  25 mmDrive type:  expanding hub coupling D34
Timing-Belt Reverse Unit 8 80 R50 II VK32

Timing-Belt Reverse Unit 8 80 R50 II VK32

0.0.426.19
Line:  8Diameter of timing pulley:  80 mmTiming Belt width:  50 mmDrive type:  spline shaft VK32
Timing-Belt Reverse Unit 8 80 R50 II with Bore

Timing-Belt Reverse Unit 8 80 R50 II with Bore

0.0.426.21
Line:  8Diameter of timing pulley:  80 mmTiming Belt width:  50 mmDrive type:  Hole ø 8H7, reborable
Timing-Belt Reverse Unit 8 80 R50 II with Bore D34

Timing-Belt Reverse Unit 8 80 R50 II with Bore D34

0.0.665.45
Line:  8Diameter of timing pulley:  80 mmTiming Belt width:  50 mmDrive type:  expanding hub coupling D34

Downloads

CAD Data

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23170208
eCl@ss 7.1
23170208
eCl@ss 11.0
23170208
eCl@ss 4.0
23170301
eCl@ss 4.1
23170301
eCl@ss 5.0
23170210
eCl@ss 5.1
23170210
eCl@ss 6.0.1
23170210
UNSPSC 9.0
26111504
UNSPSC 7.0
26111504
Customs tariff number
84879090