Drive Unit GSF 8 40 R10

Drive Unit GSF 8 40 R10


On request

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Drive Unit Al, natural
Hollow shaft ⌀12 H7, St, stainless
Effective radius 18.3 mm
Mmax = 3 Nm
Length of Timing Belt inside the Timing-Belt Reverse Unit: 137 mm
Button-Head Screw ISO 7380-M8x18, St, bright zinc-plated
Retaining bracket, St, stainless
2 Hexagon Socket Head Cap Screws DIN 7984-M4x6, St, bright zinc-plated
Installation guide


Article number 0.0.654.21
Line line 8
ESD-safe No
Weight m = 442.5 g
Delivery unit 1 set


It’s so small and yet it’s a complete timing-belt drive! All the components fit together to make a compact solution. The tensioning device for the Timing Belt is integrated into the Reverse Unit. The ball-bearing mounted pulleys ensure that everything runs smoothly. When used with Slide Set GSF 8 80x40, it creates a Linear Unit made up of just a few components. Drive Set GSF 8 40 is used to connect to the motor.
Drive Unit and Timing-Belt Reverse Unit GSF 8 40 R10 can be used with a wide range of Line 8 profiles that are 40 mm in height as a guide. These profiles must have one Line 8 groove for the T-slot slider and another Line 8 groove opposite, through which the timing belt can be returned.
The Drive Unit and Reverse Unit are fixed in place in the core bore of the profile, which has to be tapped with an M8 thread.
1 Drive Unit GSF 8 40 R10
2 Profile X 8 40x40 1N
3 Timing Belt R10 T5
4 Carriage plate*
5 Sliding shoe*
6 Slide*
7 Timing-Belt Reverse Unit GSF 8 40 R10
*(4, 5, 6 = Slide Set GSF 8 80x40)
Belt length
L= 2 x l + 210 mm


CAD Data


Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
eCl@ss 6.0.1
eCl@ss 11.0
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 7.1
Customs tariff number