listón plástico de borde para cristal


Variante seleccionada
Moldura brida, Brida 6 4-6mm, gris, similar al RAL 7042 (0.0.614.91)
Moldura brida, Brida 6 4-6mm, gris, similar al RAL 7042
0.0.614.91
Mostrar todo
* Información obligatoria

Datos técnicos

los productos de item se basan en diferentes dimensiones modulares y sus ranuras de sistema asociadas.Cada perfil de las líneas 5, 6, 8, 10 y 12 necesita el tamaño correspondiente de sujeciones.Los perfiles en la línea X disponen de una ranura de sistema de la línea 8, pero tienen una superficie particularmente plana con un radio mínimo de curva que los hace ideales para realizar construcciones selladas.
Todas las sustancias están registradas de conformidad con la normativa REACHREACH (Registro, Evaluación, Autorización y Restricción de sustancias químicas) asegura que los usuarios dispongan de información precisa sobre el tipo y las propiedades de los materiales de operación, lubricantes, etc., con los que puedan entrar en contacto.
Los componentes que cumplen con la directiva RoHS no contienen sustancias peligrosas como plomo o cadmio.Directiva EC 2002/95/EC (RoHS 1) restringe el uso de ciertas sustancias en dispositivos y componentes electrónicos.Esto incluye baterías, etc.

Volumen de suministro

a = 20.5 mm

Características

Número de artículo0.0.614.91
Serieserie 6
Protección contra ESDNo
Pesom = 75 g/m
Unidad de suministrocorte máx. 3000 mm
MaterialPP/TPE
Colorgris, similar al RAL 7042

Descripción

Con las moldura brida panel se puede montar cualquier panel (preferiblemente de metacrilato, PET-G o policarbonato) en un marco de perfil cerrado ya existente. A parte de los cortes a medida, no es necesario realizar otros mecanizados en el panel ni en las molduras brida.
Panel-Clamping Strips consist of two components. The first of these, an aluminium strip (0.0.615.01), locates into the profile groove and holds the panel element in place. A second strip, of flexible plastic, is then used to secure both the panel element and the aluminium strip in the groove. If necessary, the plastic strip can be levered out in order to remove the panel element from the frame.
The Panel-Clamping Strips 6 secure the panel element so that there is an offset of 1.6 mm to the outer edge of the profile. This produces a smooth outer wall for protective enclosures and helps reduce turbulence caused by air flows.
The choice of Panel-Clamping Strip depends on the thickness of the panel element (s) and the particular Line:

Line 6: s = 2 - 4 / 4 - 6 mm

Indicaciones de montaje

When an Automatic-Fastening Set is installed at the end of a profile, Panel-Clamping Strip 6 Al and Panel-Clamping Strip 6 made of plastic both need to have 35 mm trimmed from them so they can be fitted into the Line 6 groove.

Variantes

Ordenar por

Line:  6Delivery unit:  Cut-offLength:  20 ... 3000Groove type:  6 mmPanel thickness range:  2-4 mm
Line:  6Delivery unit:  PieceLength:  3000 Groove type:  6 mmPanel thickness range:  2-4 mm
Line:  6Delivery unit:  Cut-offLength:  20 ... 3000Groove type:  6 mmPanel thickness range:  4-6 mm
Line:  6Delivery unit:  PieceLength:  3000 Groove type:  6 mmPanel thickness range:  4-6 mm
Line:  8Delivery unit:  Cut-offLength:  20 ... 3000Groove type:  8 mmPanel thickness range:  2-4 mm
Line:  8Delivery unit:  PieceLength:  3000 Groove type:  8 mmPanel thickness range:  2-4 mm
Line:  8Delivery unit:  Cut-offLength:  20 ... 3000Groove type:  8 mmPanel thickness range:  4-6 mm
Line:  8Delivery unit:  PieceLength:  3000 Groove type:  8 mmPanel thickness range:  4-6 mm
Line:  8Delivery unit:  Cut-offLength:  20 ... 2000Groove type:  8 mmPanel thickness range:  4-6 mm
Line:  8Delivery unit:  PieceLength:  2000 Groove type:  8 mmPanel thickness range:  4-6 mm
Line:  8Delivery unit:  Cut-offLength:  20 ... 3000Groove type:  8 mmPanel thickness range:  6-8 mm
Line:  8Delivery unit:  PieceLength:  3000 Groove type:  8 mmPanel thickness range:  6-8 mm
Line:  8Delivery unit:  Cut-offLength:  20 ... 3000Groove type:  8 mmPanel thickness range:  8-10 mm
Line:  8Delivery unit:  PieceLength:  3000 Groove type:  8 mmPanel thickness range:  8-10 mm

descargas

Datos CAD

Clasificación

Las clasificaciones son estándares de datos de productos de toda la industria que se utilizan, entre otras cosas, para soportar el procesamiento estructurado en los sistemas ERP y de negocio electrónico. ¿Necesita los datos de clasificación de todos los productos de item para su sistema de adquisición electrónica? Si es así, no dude en contactarnos.
eCl@ss 8.0
35030190
eCl@ss 11.0
23360492
eCl@ss 7.1
35030190
UNSPSC 7.0
30102315
UNSPSC 9.0
30102315
eCl@ss 4.1
35030108
eCl@ss 5.0
35030190
eCl@ss 5.1
35030190
eCl@ss 6.0.1
35030190
eCl@ss 4.0
35030108
Código arancelario
39169090