Linear Unit LRE ZS

Linear Unit LRE ZS

Show all 2 variants
1 5.678
On request
configure now
* Mandatory information

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.


Article number 0.0.679.91
Line line 8
ESD ESD-safe = No
Moment of Inertia, torsional It = 9,94 cm4
Moment of Inertia, x-axis Ix = 69,45 cm4
Moment of Inertia, y-axis Iy = 16,6 cm4
Total mass m = m1 + H * m2
Maximum operating load Fx max = 350 N
Maximum force in direction y Fy max = 1.300 N
Maximum force in direction z Fz max = 880 N
Weight m = 5,105 kg
Weight, spec. Length m = 4,885 kg/m
Weight per length of the drive medium (timing belt, chain) mlz = 0 kg/m
Efficiency . = 1
Delivery unit 1 pce.
Basic mass (when stroke length = 0 mm) m1 = 5,105 kg
Mass per mm of stroke m2 = 4,885 g/mm
Max. acceleration amax  = 5 m/s2
Max. speed Vmax = 3 m/s
Repeat accuracy . = 0.5 mm
Mass moment of inertia when stroke length = 0 mm J0 = 1.678,2 kg mm2
Mass moment of inertia per kg of payload JN = 525,2 kg mm2/kg
Mass moment of inertia per m of stroke JH = 0 kg mm2/m
Stroke max. Hmax = 5.678 mm
max. drive torque . = 8 Nm
Maximum moment around the x axis Mx max = 22 Nm
Maximum moment around the y axis My max = 35 Nm
Maximum moment around the z axis Mz max = 52 Nm
Frictional moment . = 0,9 Nm
Safety clearance smin = 31 mm
Support width when Fy max. .  = 600 mm
Support width when Fz max. .  = 1.600 mm
Stroke h = 144 mm/r
Resistance Moment, x-axis Wx = 17,38 cm3
Resistance Moment, y-axis Wy = 8,3 cm3


Extra light and extra strong! Linear Unit LRE 8 D10 80x40 ZS K light uses a rack made of high-strength plastic. As a result, it is ideal for moving medium loads securely and quickly.
The Linear Unit features a low dead weight and excellent safety for vertical movements. The modular rack is made of fibre-glass reinforced plastic. It is safely concealed in the groove of a Profile 8 light and exhibits high rigidity and low coefficients of friction. The plastic ensures stability, smooth travel and corrosion resistance. The slide runs on a high-strength Double-Bearing Unit and hardened steel Shafts.
The low mass of the Support Profile and rack enable impressive dynamics, even during lifting movements. This combination is also a very economical solution for many tasks. Linear Unit LRE 8 D14 80x40 ZS with a metal rack is available as a rack system for moving larger masses.
Linear Unit LRE 8 D10 80x40 ZS K is supplied ready-to-install in the desired length. The plastic rack can also be ordered separately to build custom solutions.

Assembly Instructions


Sort by

Rack material:  Plastic (POM) Guide type:  Shaft D10
Rack material:  Steel (bright zinc-plated) Guide type:  Shaft D14

Load Calculation




Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
eCl@ss 11.0
eCl@ss 7.1
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0.1
Customs tariff number